Nowadays, there are so many products of office chair cylinders in the market and you are wondering to choose a best one.You have searched for office chair cylinders in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings office chair cylinders which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
618 reviews analysed
1. MySit 6" Long Stroke Office Chair Gas Lift Cylinder Pneumatic Shock Longest Heavy Duty Replacement for Tall Person (GasLift160x4_SNR) …
Feature
- 6″ piston stroke travel (up & down), Used to increase the office chair / stool seat height
- 2″ (50mm) wide outter tube diameter that will fit most chair bases, Standard Shaft Diameter – Fits 1.1″ (28mm) Seat Plates,Mechanism interface.NOT FIT 40mm Diameter Base Hole.
- 18.3″ (465mm) total overall extended length (from top to bottom)
- Class 4 level, Top Quality Level, Heavy Duty Construction, Specialized for Heavy Person,BIFMA Plus Quality
- Heavy Duty replacement for gas lift cylinders on many office chairs and executive chairs, including many purchased at office supply stores
2. MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement | 5-Year Warranty Heavy Duty Shortest Gas Spring Rod Chair Part Sinking 1.2 inches Universal Size Black for Short Person
Feature
- Sink:1.2 inch (3 cm) Fit most of chairs. No worry about the height of the chair foot.
- Class 4 level, Top Quality Level, Heavy Duty Construction, Specialized for Heavy Person,BIFMA Plus Quality
- Height Adjustable range: 2.2 inches, outside Cylinder bottom shrinkage make task chair minimum seat height shorter.
- Outer tube diameter is 2 Inches, fit for 2 Inches Base holes. Please measure your old gas cyclinder size for reference, in case of diameter not fit or too short / too tall/ touch the floor. or contact seller for suggesttion.NOT FIT 40mm Diameter Base Hole.
- 5 years Warranty – 30 Days Free Replacement or MoneyBack Guarantee. Please contact with us before rerurning.
3. Chair Saver The Kit – Fix Your Sinking Office Chair in Under A Minute!
Feature
- Free shipping for prime and non-prime members in the USA and reduced shipping for our international customers
- Maintains the height of an office chair when the adjustable cylinder fails and installs in under a minute!
- Inexpensive, easy to use, ergonomic with no chair disassembly or tools required
- Universal fit, 30 day satisfaction guarantee and 5 year warranty – you won’t get that with any replacement cylinders
- Small businesses save 10% when you buy 10 or more kits and 20% when you buy 50 or more! Promotion is applied at check out
4. Mastery Mart Office Chair Gas Lift Cylinder Replacement, Heavy Duty 320LBs/146KGs, Universal Size Fits All Office Chair and Swivel Chair, 4” Length Extension (Black)
Feature
- ➤ PREMIUM GRADE PLATED GAS LIFT CYLINDER. This heavy duty gas lift cylinder is manufactured to meet the highest industry standard (BIFMA/ANSI), the lift has maximum capacity up to 320 LBs/ 146 KGs.
- ➤ UNIVERSAL SIZE THAT FITS ALL YOUR CHAIRS. Its universal size is compatible with most of office chairs sold in the USA/Canada.
- ➤ SIZE DETAIL – 4” (100 mm) Adjustable Travel Length. 2” (50 mm) Outer Cylinder Diameter
- 1-1/10” (28 mm) Inner Cylinder Diameter
- ➤ EASY INSTALLATION AND SMOOTH MOVEMENT. Very easy installation and replacement. Piston stroke that goes up and down and rotates 360 degrees.
- ➤ 100% SATISFACTION GUARANTEED. If you don’t absolutely enjoy it, we guarantee you that we will reimburse you for 100% of your order.
5. OFFICE FACTOR, Office Chair Gas Lift Cylinder, FITS 2 INCHES Bases ON The Center, Heavy Duty 330 LBS Weight Capacity, Highest END Class 4, (Black)
6. (#108) Gas Cylinder Bearing Kit
7. Mastery Mart Office Chair Base Replacement, 28 Inch Ultra Heavy Duty (320 LBs) Metal Leg, Reinforced to Repair Swivel Gaming Chair with Universal Caster and Cylinder Size (Black)
Feature
- ➤ WHAT’S IN THE BOX: 1 Set of Office Chair Black Base Replacement, Installation Package, 1 Base Cap.
- ➤ PREMIUM GRADE METAL MADE STRONG BASE REPALCEMENT: This Heavy Duty Chrome Base Stool is manufactured to meet the Office Chair’s highest industry standard (BIFMA and ANSI). The reinforced metal and durability of the base will ensure your chair’s base is firmly sound for many years.
- ➤ UNIVERSAL SIZE: The office chair base works perfectly with almost every office chair, gaming chair, desk chair, task chair and swivel chair on the market. The office chair base replacement has universal sockets that will fit your original casters and gas lift cylinder.
- ➤ SIZE DETAIL: Office Chair Base Size in Diameter: 28’’ (70 cm). Chrome Base Leg Length: 12.6’’ (32 cm). Standard Gas Cylinder Socket: 2’’ (5 cm). Standard Caster Sockets: 7/16’’ x 7/8’’ (11mm x 22mm). Height of the Chrome Base: 3.8’’ (9.5 cm)
- ➤ 100% SATISFACTION GUARANTEED – Very easy installation and replacement with our simple and clear instruction sheet. If this doesn’t fit your chair, you can simply return it for a full refund.
8. Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement
Feature
- Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5″ stroke (seat travel from lowest to highest settings).
- Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it’s load capacity is 350 pounds.
- Length Compressed: 11.5″ Fully Extended: 16″ Travel: 4.5″, Cylinder Diameter: 28mm (1.1″) Column Diameter: 50mm (approx 2″)
- After install, If the chair can’t lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2.
- Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012.
Description
Package Include: 1 x gas cylinder(chair not included.)
Samhongsa was founded in 1971, is a professional production and sales of Cylinder for office chair. Samhongsa have advanced production equipment and testing equipment and improved management system. Samhongsa always insist on the operation idea of “human-oriented, honesty first, lean management and excellence” Providing perfect quality and service for users and possess the good reputation. Samhongsa’s cylinder have acquired and through eight world standards certifications(Such as: BIFMA;LGA;TUV;SGS, ect.). Samhongsa have built a friendly, long-term with Herman Miller, Allsteel, Steelcase, HON, etc. world-renowned brands.
Only For Aeron chair made between 1996-2012.
9. Cable Actuator Heavy Duty 5" Stroke Cylinder Replacement for Steelcase Think Office Chair
Feature
- Listing is for a brand new never used WITH 350N, office chair seat height adjustment pneumatic gas lift cylinder. 5.0″ stroke (seat travel from lowest to highest settings)
- Length Compressed: 11.8″ Fully Extended: 16.5″ Travel: 5.0″
- Cylinder Diameter: 28mm (1.1″) Column Diameter: 50mm (approx 2″)
- Heavy duty lift cylinders replacement for Steelcase Think Chair
- Only available for Steelcase Think chair, Offer 5 years replacement warranty.
Description
Package Include: 1 x cylinder(chair not included).
Samhongsa was founded in 1971, is a professional production and sales of Cylinder for office chair. Samhongsa have advanced production equipment and testing equipment and improved management system. Samhongsa always insist on the operation idea of “human-oriented, honesty first, lean management and excellence” Providing perfect quality and service for users and possess the good reputation. Samhongsa’s cylinder have acquired and through eight world standards certifications(Such as: BIFMA;LGA;TUV;SGS, ect.). Samhongsa have built a friendly, long-term with Herman Miller, Allsteel, Steelcase, HON, etc. world-renowned brands.
10. Pneumatic Cylinder for Herman Miller Aeron Chair #1B08VM
Feature
- Listing is for a brand new never used CLASS 4 WITH 400N, office chair seat height adjustment pneumatic gas lift cylinder. 6.0″ stroke (seat travel from lowest to highest seatings).
- Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it’s load capacity is 350 pounds.
- Cylinder Diameter: 28mm (1.1″) Column Diameter: 50mm (approx 2″).
- Cylinder for Size A, B and C Aeron Chair. Only For Aeron chair made between 1996-2012.
- offer 5 years replacement warranty.
Description
Package Include: 1 x gas cylinder(chair not included.) Samhongsa was founded in 1971, is a professional production and sales of Cylinder for office chair. Samhongsa have advanced production equipment and testing equipment and improved management system. Samhongsa always insist on the operation idea of “human-oriented, honesty first, lean management and excellence” Providing perfect quality and service for users and possess the good reputation. Samhongsa’s cylinder have acquired and through eight world standards certifications(Such as: BIFMA;LGA;TUV;SGS, ect.). Samhongsa have built a friendly, long-term with Herman Miller, Allsteel, Steelcase, HON, etc. world-renowned brands.
Only For Aeron chair made between 1996-2012.
Conclusion
By our suggestions above, we hope that you can found Office Chair Cylinders for you.Please don’t forget to share your experience by comment in this post. Thank you!