We spent many hours on research to finding johnson 120 hp impeller, reading product features, product specifications for this guide. For those of you who wish to the best johnson 120 hp impeller, you should not miss this article. johnson 120 hp impeller coming in a variety of types but also different price range. The following is the top 10 johnson 120 hp impeller by our suggestions
787 reviews analysed
1. 1 – Johnson Pump 09-812B-1 Impeller Kit
Description
Johnson Pump 09-812B-1 Impeller F6B f Sea Water Pump F6B-9 Re: Jabsco 13554-0001
2. Johnson Pump 09-812B-1 Impeller
Description
Impellers – Features impeller article number 09-812B-1 MC97 neoprene (for cooling) replaces jabsco 13554-0001 USA.
3. Shoreline Marine Pump
Feature
- Use With 32 ounce (946 ml) Gear Lube Bottle
- Yamaha Tohatsu Adapter
- Fits Any Outboard or Stern Drive with A 3/8 inch (10 mm) – 16 Drain Screw
- For use with 32 ounce gear lube bottles
- Gear lube pump fits all Mercury and Mariner Outboards except those of Japanese Origin
- Also Fits Mercury Mercruiser and Speedmaster gear housings
Description
Lower unit lube pump uses standard sized quart bottle. Fits domestic O/B and I/O motors. Includes adapter for most O/B and I/O engines. Fits – Johnson/Evinrude Outboards, OMC Stern Drives Cobra and Volvo Penta SX Stern Drives, Yamaha Nissan Tohatsu and Honda outboards
4. Evinrude E-TEC Water Pump Kit 2004-07 75-250HP 5001595
Feature
- Part Manufacturer: Evinrude Johnson / BRP / OMC
- Part Number: 5001595
- UPC: 745419270315
- Original OEM water pump kit
- Please check with your local Evinrude Johnson / BRP / OMC brand dealer for engine / boat / brand / model / year cross-referencing compatibility
- Sold as shown in photos
- Note every computer shows colors differently
- All measurements are approximate
- Hardware and instruction/installation manual not included
Description
Boat part number 1088819 is a new water pump kit from Evinrude Johnson / BRP / OMC, part number 5001595 .
Per manufacturer, this original OEM water pump kit is used on:
- 75 / 90 Evinrude E-TEC (2004 – AF)
- 105 Commercial (1998 – 2001)
- 115 Evinrude E-TEC (2007 – 2009)
- 90 / 115 SL (1995 – 2006)
- 90 / 115 DI (1999 – 2006)
- 20 / 140 25″ Shaft suffix (1993)
- 120 / 130 / 140 25″ Shaft (1994 – 2000)
- 135 25″ Shaft V4 (2001)
- 150 / 175 25″ Shaft 6V6 (1993 – 2006)
- 150 / 175 20″ Shaft “SL” models (1994 – 1995)
- 150 / 175 20″ Shaft “SL” & “EL” models (1996 – 1998)
- 150 / 175 V6 (2000 – 2006)
- 135 / 150 / 175 DI (1997 – 2006)
- 150 / 175 / 200 Evinrude E-TEC (2007 – AA)
- 200 / 225 25″ & 30″ Shaft (1993 – 1997)
- 200 / 225 / 250 25″ & 30″ Shaft V6 & “TL” (1998)
- 200 / 225 / 250 25″ Shaft V6 (1999)
- 200 / 225 / 250 V6 (2000 – 2001)
- 200 / 225 DI 25″ Shaft (1999)
- 200 / 225 / 250 DI (2000 – 2005)
- 200 / 225 / 250 Evinrude E-TEC 3.3L (2005 – AA)
- 250 H.O. / 300 3.4L or suffix (2009)
Please check with your local Evinrude Johnson / BRP / OMC brand dealer for engine / boat / brand / model / year cross-referencing compatibility.
Specifications:
- Part Manufacturer: Evinrude Johnson / OMC / BRP
- Part Number: 5001595
- UPC: 745419270315
Sold as seen in pictures. Customers please note every computer shows colors differently. All measurements are approximate.
Hardware and instruction / installation manual not included.
5. Sierra 18-3392 Water Pump Kit
Description
The Sierra 18-3392 Water Pump Kit is interchangeable with the following: GLM 12102, Evinrude/Johnson 434421, 5001594, 390768, 392750, 395062, Mallory 9-48203. Each Sierra product meets or exceeds the original equipment part it replaces.
6. SEAFLO 12V Water Pressure Diaphragm Pump 5.5 GPM 60 PSI for Boat Marine RV Caravan Industrial
Description
SEAFLO 12V Water Pressure Diaphragm Pump 5.5 GPM (20.8 LPM) 60 PSI
Introduction
The 51-Series is our most heavy-duty water pump. It provides high volume water flow with reduced pump cycling thanks to the large five-chamber diaphragm. It provides up to 5.5 gallons per minute. The 51-Series pumps are self-priming, can run dry without damage, and are performance reliable and low current. This automatic demand water system pump has a built-in pressure switch which automatically starts and stops the pump when the faucet is opened and closed. They are easy to install service and winterize. This pump works best when paired with a SEAFLO Accumulator Tank.
Technical Specifications
Voltage: 12 VDC
Dimensions: 8.25″ X 5.30″ X 6.0″
Inlet / Outlet: 1/2″-14 MNPT
Flow Rate: 5.5GPM
Amps: 8.0 (17.0 Max. Amps)
Shut-off Pressure: 60 PSI
Weight: 7 lbs
7. Sierra International 18-3315-2 Water Pump Kit with Housing
Feature
- For: 90/115SL (1995-Up), 120 / 125ESX (1993-94), 120 / 130 / 140 / 150 / 175 / V-6 / V-8 (1993-Up)
- Fits: GLM – 12000, Johnson / Evinrude Outboard – 0435929, 5001595, Mallory – 9-4820
- All Sierra products meet or exceed the original equipment part it replaces
- All Sierra parts qualify for and are covered under Sierra’s industry leading customer satisfaction warranty
- Before ordering, please verify this is the correct part for your application: for assistance, please call Sierra’s Tech Support at 1-877-663-8396
Description
- 18-2557 Impeller Gasket
- 18-3405 Water Pump Housing
- 18-3059 Impeller with Key
- 18-3346 Cup and Plate Assembly
- 18-2703 Grommet
- 18-2706 Grommet
- 18-3135 Stainless Steel Bolt – 2
- 18-2704 Grommet
- 18-2536 Impeller Housing Seal
- 18-7158 O-Ring
- 18-7143 O-Ring
- 18-3369 Stainless Steel Bolts – 4
- 18-3138 Impeller Key
8. A.A Water Pump Impeller Kit for Johnson Evinrude BRP Outboard 75-250 HP 5001595
Description
Fits: 75 hp DI 3-Cylinder 2004, 90 hp DI 1999 & Later, 90 hp DI 3-Cylinder 2004, 90 hp SL 1995 & Later, 105 hp Commercial 1998-2001, 115 hp DI 1999 &Later, 115 hp SL 1995 & Later, 120 hp “F” Suffix 25″ 1993, 120 hp 25″ 1994-2000, 130 hp 25″ 1994-2000, 135 hp DI 1997 & Later, 135 hp V4 25″ 2001, 140 hp “F” Suffix 25″ 1993, 140 hp 25″ 1994-2000, 150 hp 2000 & Later, 150 hp 25″ 1993 & Later, 150 hp DI 1997 & Later, 150 hp EL 20″ 1996 – 1998, 150 hp SL 20″ 1994 – 1998, 175 hp 2000 & Later, 175 hp 25″ 1993 & Later, 175 hp DI 1997 & Later, 175 hp EL 20″ 1996 – 1998, 175 hp SL 20″ 1994 – 1998, 200 hp 2000 & Later, 200 hp 25″ 1999, 200 hp 25″ & 30″ 1998, 200 hp 25″ & 30″ 1993-1997, 200 hp 25″ DI 1999, 200 hp DI 2000 & Later, 225 hp 2000 & Later, 225 hp 25″ 1999, 225 hp 25″ & 30″ 1998, 225 hp 25″ & 30″ 1993-1997, 225 hp 25″ DI 1999, 225 hp DI 2000 & Later, 250 hp 2000 & Later, 250 hp 25″ 1999, 250 hp 25″ & 30″ 1998, 250 hp DI 2000 & Later,
9. SEAFLO 12V 5.5 GPM 60 PSI Water Pressure Diaphragm Pump with NPT Fittings
Description
INCLUDED: -(1) Diaphragm Pump SEAFLO Model SFDP1-055-060-51 ISO 9001:2008 -(1) Set of Instructions -(2) 1/2″ Barbed Hose Adapters -(1) 50 Mesh Inlet Strainer AMPS: 8.0 (17.0 Max. Amps) DIMENSIONS: 8.25″ X 5.30″ X 6.0″ INLET/ OUTLET: 1/2″ NPT (1/2″ Barbed Hose Adapters Included) MAX PRESSURE: 70 PSI PRIMING CAPABILITY: 6 FEET
10. New Water Pump Kit for Johnson Evinrude OMC Outboard 85-300HP Motor 5001594
Description
New Aftermarket Water Pump Kit With Housing With Weep Hole Replament for OEM part number 5001594, 395062, 434421 Fits the following applications: Johnson / Evinrude 85hp 1979-1995 Johnson / Evinrude 88hp 1979-1992 Johnson / Evinrude 90hp 1979-1994 Johnson / Evinrude 100hp 1979 & Up Johnson / Evinrude 110hp 1986-1992 Johnson / Evinrude 115hp 1979-1994 ( Except SL Models 1995 & Up/ FFI Models Johnson / Evinrude 125hp ESX 25″ 1993-1995 Johnson / Evinrude 140hp 1979 & Up JOhnson / Evinrude 150hp 1979 & Up Johnson / Evinrude 225hp 20″ 1993 & Up Johnson / Evinrude 200hp – 235hp Crossflow 1979 & UP Johnson / Evinrude V4 Cross Flow 20 & 25″ 1993 & Up Johnson / Evinrude V4 Looper 20″ 1993 & Up Johnson / Evinrude V4, V6, V8 1982-1994 (Except 1993-1994 25″ & 30″ V6 & V8) Johnson / Evinrude V6, V8 20″ 1993 & Up
Conclusion
By our suggestions above, we hope that you can found Johnson 120 Hp Impeller for you.Please don’t forget to share your experience by comment in this post. Thank you!
