Finding your suitable readers for infrared range sensor arduino is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for infrared range sensor arduino including detail information and customer reviews. Let’s find out which is your favorite one.
509 reviews analysed
1. OSOYOO 10PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot
Feature
- IR Infrared Obstacle Avoidance Sensor Module can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on.
- the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted
- The output port OUT sensor module can be directly connected to the microcontroller IO port, you can directly drive a 5V relay.
- It has a pair of infrared transmitting and receiving tube, tube infrared emit a certain frequency, when detecting direction meet with obstacles (reflecting surface), reflected infrared receiving tube, after the comparator circuit processing, green indicator will light up, at the same time signal output interface to output digital signal (a low level signal).
- Can be used for 3-5V DC power supply modules. It has red power indicator.
Description
The IR Infrared Obstacle Avoidance Sensor Module detection range can be through the potentiometer to adjust and have small interference, easy to assemble, easy to use. It can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, and black and white line tracking and so on
On-line tutorial: http://osoyoo.com/2017/07/arduino-lesson-obstacle-avoidance-sensor/
Specification
The output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ;
the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted
Can be used for 3-5V DC power supply modules
When the power is turned on, the red power indicator light
Using the comparator LM393
Interface :
1. VCC: External 3.3V-5V voltage (can be directly connected to 5v MCU and 3.3v MCU)
2. GND: GND External
3. OUT: Small board digital output interfaces (0 and 1)
Connection : VCC-VCC; GND-GND; OUT-IO
With the screw holes of 3mm , easy fixed installation
Board Size : 3.1CM * 1.5CM / 1.22 * 0.59″
Package includes:
10 x Infrared Obstacle Avoidance Module
2. Obstacle Avoidance Sensor, Lidar Range Finder Sensor Module TFmini-s, Lidar Tiny Module Single-Point Micro Ranging Module UART / I2C Compatible with Pixhawk, Arduino and Raspberry Pi
Feature
- ★ User Manual and Document: https://drive.google.com/open?id=1WhRAc1DTncZI5LNxJ2Zs_YsqsWrDiMuB. ★ ★ Note: TFmini-s version is UART by default. If you need I2C, please switch by yourself. It is compatible with Raspberry Pi and Arduino.
- Upgraded Lidar Module: TFmini-s is an upgraded single-point micro ranging module based on TFmini. The dead zone is shortened to 10 cm, and the outdoor performance and accuracy of different reflectances are improved.
- Tiny Body Yet Big Wisdom: low-cost, small-size and low power consumption. Distance Resolution is 1cm, frame rate is 100Hz, ambient light immunity is 70Klux and central wavelength is 850nm.
- Tiny Yet Powerful: It is based on ToF (Time of Flight) principle and integrated with unique optical and electrical designs, so as to achieve stable, precise, high sensitivity and high-speed distance detection.
- Main Application Scenario: Pedestrian detection, vehicle detection, intelligent barrier gate and altimeter.
Description
Description:
TFmini-s is a upgraded single-point micro ranging module based on TFmini. The blind zone is shortened to 10cm, the outdoor performance and accuracy of different reflectivity are improved, it can achieve stable, accuracy, sensitive and high frequency range detection.
TFmini-s is compatible with both the UART and I2C interface. Different interfaces can be switched by commands.
Performance:
Operating Range : 0.1m~12m90%Reflectivity
Accuracy: ±6cm@(0.1-6m), ±1% @ (6m-12m)
Distance Resolution: 1cm
Frame Rate: 100Hz
Ambient Light Immunity: 70Klux
Operating Temperature: 0℃~60℃
Optical Parameters:
Light Source: VCSEL
Central Wavelength: 850nm
Photobiological Safety: Class1 (EN60825)
Electrical Parameters:
Supply Voltage: 5V±0.1V
Average Current: ≤140mA
Power Consumption: ≤0.7W
Peak Current: 200mA
Communication Level: LVTTL(3.3V)
Communication Interface: UART / I2C
Main application scenario:
Pedestrian detection
Vehicle detection
Intelligent barrier gate and altimeter
Package Including:
1 * TFmini-s UART / I2C Laser Range Finder Module
2 * Cable
3. Gowoops Infrared Photoelectric Sensor E18-D80NK Obstacle Avoidance for Arduino Robot Car
Feature
- E18-D80NK is a set of transmitter and receiver in one of the photoelectric sensor
- Detection distance can be adjusted according to requirements
- Long distance detection, low visible light interference, cheap price, easy assembly, and easy to use
- Can be widely used in robot obstacle avoidance, pipeline line piece and many other automation products
Description
Pin Definitions:
Brown —- “+”
Blue —- “-“
Black —- Signal
Applications:
1. Automatic production line of goods counting equipment
2. Multi-function reminder
3. Take the maze robot
Electrical Characteristics:
Sensing range: 3-80cm
Sensing object: Translucency, opaque
Supply voltage: DC5V
Output operation: Normally open (O)
Output: DC three-wire system (NPN)
Technical Parameters:
1. Output Current DC / SCR / Relay Output: 100mA / 5V power supply
2. Current consumption DC <25mA
3. Response time <2ms
4. Pointing angle: ≤ 15 °, the effective distance 3-80 CM adjustable
5. Detection of objects: transparent or opaque body
6. Working temperature: -25°C ~ +55 °C
7. Standard detection object: the following incandescent 3000LX below 10000LX sunlight
8. Housing material: plastic
Size:
Diameter: 18MM
Sensor length: 45MM
Lead Length: 45CM
Package Include:
1 x E18-D80NK Photoelectric Sensor
4. ELEGOO 5PCS HC-SR04 Ultrasonic Module Distance Sensor for Arduino UNO MEGA2560 Nano Robot XBee ZigBee
Feature
- Ultrasonic hc-sr04 distance measuring transducer sensor
- HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object.
- ~Power supply: 5V DC
- quiescent current: less than 2mA
- effectual angle: less than 15°
- distance: 2cm500cm
- resolution: 0. 3 cm~
- Package Content: 5pcs HC-SR04 with a little gift
5. HC-SR501 PIR Sensor Infrared IR Body Motion Module for Arduino Raspberry Pi(Pack of 5pcs)
Feature
- Use Potentiometer 105, output timing is from 0.5S to 200S
- Reference links: https://www.mysensors.org/build/motion
- Operating voltage range: DC 4.5-20V,Quiescent Current: <50uA Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
- Use:It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, is a hightech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems
- How to email us? Please click “Stemedu”(you can find “Sold by Stemedu” under Buy Now button), in the new page, click “Ask a question” to email us
Description
Description:
Condition:100% brand new with good quality
Product Type: HC–SR501 Body Sensor Module
Operating voltage range: DC 4.5-20V
Quiescent Current: <50ua trigger:="" l="" can="" not="" be="" repeated="" trigger/h="" can="" be="" repeated="" trigger(default="" repeated="">50ua>
Delay time: 0.5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: <100 °="" cone="" angle="" lens="">100>
sensor:Diameter:23mm(Default)
Applications:
Security Products
Human body sensors toys
Human body sensor lighting industrial automation and control, etc
Use:It can automatically and quickly open various types of incandescent, fluorescent lamps, buzzer, automatic doors, electric fans, automatic washing machine and dryer Machines and other devices, is a high tech products. Especially suitable for enterprises, hotels, shopping malls, warehouses and family aisles, corridors and other sensitive Sense of region, or for the security zone automatic lighting, lighting and alarm systems
Package Included:
5 X HC-SR501 PIR Infrared Sensor
Q:What is the level output of these? A:Output: Digital pulse high (3V) when triggered (motion detected) digital low when idle (no motion detected). Pulse lengths are determined by resistors and capacitors on the PCB and differ from sensor to sensor
FAQ
Q:What is the level output of these?
A:Output: Digital pulse high (3V) when triggered (motion detected) digital low when idle (no motion detected). Pulse lengths are determined by resistors and capacitors on the PCB and differ from sensor to sensor
6. Gowoops 10 PCS of HC-SR505 Mini Infrared PIR Human Motion Sensor Detector Module for Arduino
Feature
- ✔Automatic induction: to enter the sensing range of the output is high, people leave the sensor range automatically delay off high, output low. Ultra-small size.
- ✔Repeatable trigger: the sensor output high, the delay period, if there is human activity in its sensing range, the output will remain high until people leave after the high variable delay lOW (automatically extended sensor module detects the human body after every activity a delay period, and the last time an event is the starting point of the delay time).
- ✔Wide operating voltage range: the default operating voltage DC4.5V-20V
- ✔Micropower: quiescent current <50 microamps, especially for battery-powered automatic control products.
- ✔Output high signal:easy docking and all kinds of circuits.
Description
★HC-SR505 small body sensing module is based on infrared technology, automatic control products, high sensitivity, high reliability, ultra-small, ultra-low-voltage operation mode.
★Widely used in various auto-sensing of electrical equipment, especially battery-powered automatic control products.
Technical parameters:
Operating Voltage Range: DC4.5-20V
Static current: <60uA
Output level: High 3.3V / Low 0V
Trigger: repeatable trigger (default)
Delay time: Default 8S + -30% (can be customized range of a few tenths – tens of minutes)
PCB Dimensions: 10 * 23mm
Induction angle: <100 degree cone angle
Induction distance: 3 meters
Working temperature: -20 – +80 degrees
Sensor Lens Dimensions: Diameter: 10mm (default)
Applications:
✔Body induction lamps
✔Body sensors toys
✔Security Products
✔Industrial automation and control
✔Auto-sensing of electrical equipment
✔Battery-powered automatic control
Package includes:
10x HC-SR505
7. DFRobot Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
Feature
- DFRobot released its latest high-precision analog infrared CO2 sensor. The effectively measuring range is from 0 to 5000ppm
- This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency
- Besides, its service life could up to 5 years! It integrates temperature compensation and support DAC output
- Most importantly, the product is easy to use
- it is compatible with all types of microcontrollers such as Arduino with ADC function
- This product could be widely used in HVAC, indoor air quality monitoring, industrial process and security protection monitoring, agriculture and animal husbandry production process monitoring. Product wiki >>> https://wiki.dfrobot.com/Gravity__Analog_Infrared_CO2_Sensor_For_Arduino_SKU__SEN0219
8. LGDehome 3.3V-5V IR Infrared Flame Sensor 4 Pin Infrared Detection Module Detecting Distance 80cm (Pack of 10)
Feature
- Usage:Apply for Various flames, fire source detection. The module can detect flame or light source with wavelength in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.Used for fire alarms, etc
- The detection angle of the module is about 60 degrees, which is particularly sensitive to the flame with adjustable precision potentiometer to adjust sensitivity(blue digital potentiometer adjustment in the figure)
- The comparator output, the signal is clean, the driving ability is strong, more than 15mA
- Working voltage 3.3V-5V. Output form: digital switch output (0 and 1) and voltage output.Use wide voltage LM393 comparator
- Note:Keep the sensor and flame at a certain distance to avoid high temperature damage to the sensor.The small board output interface can be directly connected to the port of the microcontroller.Small board output mode and conversion processing for higher precision
Description
Feature:
1. It can detect flame or light source with in the range of 760 nm to 1100 nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.
2, the detection angle is about 60 degrees, which is particularly sensitive to the flame
3, the sensitivity is adjustable (blue digital potentiometer adjustment in the figure)
4, the comparator output, the signal is clean, the driving ability is strong, more than 15mA
5, with adjustable precision potentiometer to adjust sensitivity
6, working voltage 3.3V-5V
7, output form: digital switch output (0 and 1) and voltage output
8, with fixed bolt holes for easy installation
9, small board PCB size: 1.26inchx0.56inch/3.2cm x 1.4cm
10. Use a wide voltage LM393 comparator
Package Included:
10pcs IR Infrared Flame Detection Sensor Modulesbr>
Module instructions:
1. The flame sensor is most sensitive to flame and is also active to ordinary light. It is generally used for flame alarms and other purposes.
2, the small board output interface can be directly connected to the port of the microcontroller
3. The sensor and the flame should be kept at a certain distance to avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
4, small board output mode can achieve higher precision
9. HiLetgo 3pcs AM312 Mini Pyroelectric PIR Human Sensor Module PIR Infrared IR Sensor Body Manual Motion Infrared IR Detector
Feature
- Working voltage: DC 2.7-12V.
- AM312 Human Sensing Module: Based on passive body infrared technology digital intelligent automatic control products, high sensitivity, reliability, widely used in various types of automatic induction electrical equipment.
- Low power consumption and small size for easy embedded installation.
- Sensing range: ≤100 degree cone angle, 3-5 meters
- (depending on the specific lens)
Description
Technical parameters:
1. Working voltage: DC 2.7-12V;
2. Static power consumption: <>
3. Delay time: 2 seconds;
4. Blocking time: 2 seconds;
5. Trigger mode: repeatable;
6. Sensing range: ≤100 degree cone angle, 3-5 meters; (depending on the specific lens)
7. Working temperature: -20 – +60 °C;
8.PCB dimensions: 10mm*8mm;
9. Module lens: small lens;
Package Includes:
3* AM312 Mini Pyroelectric PIR Human Sensor Module
10. Gikfun Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino (Pack of 3 Sets) EK8477
Feature
- Note: The white smudge is not corrosion damage, it’s flux, can wipe it off with a rag, does not affect the use of the module
- This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program.
- It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including Arduino/51/AVR/ARM
- With signal indicating LED, easy to observe and debug.
- Pin Definitions: (1) Output (2) Vcc (3) GND
Conclusion
By our suggestions above, we hope that you can found Infrared Range Sensor Arduino for you.Please don’t forget to share your experience by comment in this post. Thank you!