
We spent many hours on research to finding hot end cooling fans, reading product features, product specifications for this guide. For those of you who wish to the best hot end cooling fans, you should not miss this article. hot end cooling fans coming in a variety of types but also different price range. The following is the top 10 hot end cooling fans by our suggestions
620 reviews analysed
1. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement
Feature
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size: 40*40*10mm / 1.57*1.57*0.39in
- Speed: 6000RPM
- Noise: 27dBA
- DC12 / 24V
- Working Current: 0.06A / 0.08A
- Air Flow: 5.75±10% CFM
- Power: 0.96W
- Cable length: Approx 28cm / 11in.
- ❃❃ Cable connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Great replacement item for your all metal hotends or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Package Including: 4 * 3D Printing Fan. Note: If you meet the fans did not work, you can swap the red and black wires in the plug got it to work. (Any questions, you can contact us and we will give you a satisfied solution!).
Description
This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.
Specification:
Rated Voltage: DC 12V
Consuming Current: 0.08A
Connector: 2pin-ph2.5
Speed: 6000 + -10% RPM
Air Flow: 6.5 CFM
Static Pressure: 2.9
Noise Level: 27dBA
Note: Any questions, you can contact us and we will give you a satisfied solution!
Notice!!!
Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.
2. WINSINN 25mm Fan 24V Dual Ball Bearing Brushless 2510 25x10mm for Cooling DIY Mini Cooling PCB/Notebook/Graphics Card – High Speed (Pack of 5Pcs)
Feature
- ✔️Dual ball bearings 2510 Fan – High Speed version
- ✔️High quality Dual ball bearings, More stable and Long life, suitable for continuous work. Use time can 24 hours / day. The life expectancy is about 60,000 hours. No maintenance required. But Lubricating oil can further reduce noise.
- ✔️️Rated voltage: DC 24V
- ✔️️Size: 25x25x10mm
- ✔️️Made by WINSINN
3. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
4. WINSINN 24V 40mm Fan Blower for Cooling Creality Ender 3 / Pro Turbine Turbo 40x10mm 4010 DC Brushless Hydraulic Bearing, with Air Guide Parts – High Speed (Pack of 4Pcs)
Feature
- ✔️Hydraulic Bearings – High Speed version
- ✔️High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
- ✔️for Cooling Creality Ender 3 / Pro , Rated voltage: DC 24V
- ✔️4010 Blower Fan + 40mm Fan + Air Guide Parts
- ✔️Made by WINSINN.
Description
►Hydraulic Bearings – High Speed version
►High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
►For: Cooling Creality Ender 3 / Pro
►Size: 40x40x10mm
►Rated voltage: DC 24V
►With 2 x Air Guide Parts :))
—————————————————————————————————————
Package include:
►2 x High Speed 4010 24V Hydraulic Bearings Blower Fan
►2 x High Speed 40mm 24V Hydraulic Bearings Fan
►2 x Air Guide Parts
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
5. Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X
Feature
- 2020 Upgraded Ender 3 Hotend Extruder Kit for Creality Ender 3 / Endere 3 Pro / Ender 3X
- Creality Ender 3 replacement extruder be upgraded with Capricorn Bowden PTFE Tubing which high temperature resistant and not easy to carbonize during printing
- Original Creality 24V 4010 Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro/ Ender 3X
- Fans easy installation and high-efficiency heat dissipation
- Cooling fans with Low noise and 6000r/min rated speed
- 2 Terminal Connector with 2pin-ph2.5
- Creality 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend and 5 Pieces 0.4mm Nozzles for ender 3 / ender 3 pro
- Creality 3D Printer Ender 3 Pro Extruder Hotend kit, white wire was temperature thermistor, braided wire was heating tube 24V40W
Description
3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)
Capricorn Bowden PTFE Tubing:
1)Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods
24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5
Package List:
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
5×0.4mm Nozzle
1× 24V Cooling Fan
1× 24V Circle Fan
6. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24
Feature
- Rated Voltage: 24V DC, Current: 0.06A
- Bearing Type: Dual Ball Bearings, low noise, long life:50000H
- Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA
- Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm
- Warranty: 2-years, Package: 2x 24V DC brushless fans
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A
Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
7. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
Feature
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
8. Aibecy 4010 Brushless Blower Cooling Fan Turbo Fan 40 40 10mm 24V DC with Ball Bearing 2Pin Connector for CR-8S Ender 3 3D Printer Hotend Extruder
Description
Features:
DC 24V 0.1A operation voltage, fit for CR-8S Ender 3 3D printer extruder.
2Pin connector, wire length approx. 100cm / 39.4in.
Waterproof , dust-proof and super noise-reduced.
Easy installation and high-efficiency heat dissipation,
Extend the life of your 3D printer, best accessory for you.
Specification:
Volume: 4010
Compatibility: CR-8S/ Ender 3
Noise: 20dBA
Speed: 7600 r/min
Connector: 2Pin
Bearings: Oil-bearing
Cable Length: Approx. 100cm / 39.4in
Rated Power: DC 24V 0.1A
Item Body Size: 4 * 4 * 1cm / 1.6 * 1.6 * 0.4in
Item Weight: 16.5g / 0.6oz
Package Size: 13 * 9 * 1cm / 5.1 * 3.5 * 0.4in
Package Weight: 18.7g / 0.7oz
Package List:
1 * Blower Fan
9. WINSINN 40mm Fan 24V Hydraulic Bearing Brushless 4010 40x10mm for Cooling Creality Ender 3 / Pro – High Speed (Pack of 5Pcs)
Description
►Hydraulic Bearings – High Speed version
►High quality Hydraulic bearings, Better than Oil bearings, More stable and Long life, suitable for continuous work. The life expectancy is about 45,000 hours.
►Size: 40x40x10mm
►Rated voltage: DC 24V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►5 x High Speed 4010 24V Hydraulic Bearings Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
10. uxcell V6 Cooling Fan DC 12V for 3D Printer Extruder Hotend
Feature
- Rated Voltage: DC 12V
- Cover Diameter for Heatsink: 22mm / 0.87 inch
- Cable Length: 305mm / 12 inch
- Overall Size: 30 x 30 x 32mm / 2.36 x 2.36 x 0.59 inch.
- Plug Type: 2 PIN 2.54mm pitch
- Mounting Hole Diameter: 3mm
- Mounting Pitch: 25 x 25mm / 0.98 x 0.98 inch(with fan cover and 2 screws).
- Fit for cooling extruder, computer, etc.Ideal for RepRap, Rostock, Prusa Mendel, Huxley, etc.
- Easy to use, just press to it on a heatsink.
- Package Content: 1 x Cooling Fan.
Description
Application:
Easy to use, just press it on a heatsink – It helps to exhaust the heat around the heatsink.
Fit for cooling extruder, computer, etc.Ideal for RepRap, Rostock, Prusa Mendel, Huxley, etc.
Specification:
Use For: cooling 3D printer system
Rated Voltage: DC 12V
Cover Diameter for Heatsink: 22mm / 0.87 inch
Mounting Pitch: 25 x 25mm / 0.98 x 0.98 inch
Mounting Hole Diameter: 3 mm
Plug Type: 2 PIN 2.54mm Pitch
Cable Length: 305mm / 12 inch
Overall Size: 30 x 30 x 32mm / 2.36 x 2.36 x 0.59 inch
Package Content:
1 x Cooling Fan
Conclusion
By our suggestions above, we hope that you can found Hot End Cooling Fans for you.Please don’t forget to share your experience by comment in this post. Thank you!