The Best Ge 15A Thql Gfciafci Breaker

Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self test & lockout feature enables the dual function circuit breaker to automatically and continuously test itself to ensure that it is working properly. If it is detected that the device has been compromised, the device trips itself and locks out the homeowner from resetting the device, reducing the possibility of the homeowner incorrectly assuming that the device was tripped to prevent a ground/arc fault. This effortless system guarantees that only the best protection is given to your home at all times.

Siemens QF260A 60 Amp, 2 Pole, 120/240V Ground Fault Circuit Interrupter with Self Test and Lockout Feature.

Product Description

The Parallax ITEQ115 One-Pole Circuit Breaker requires a one 1″ space. HACR SWD Rated. 120/240VAC 10,000 AIC. Dimensions: 2.56″ H x 1″ W x 2.88″ L.

From the Manufacturer

Siemens plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The single pole Siemens breakers may be used in single or 3-phase load centers and are 120V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required.

Product Description

“SQUARE D HOMELINE” SINGLE POLE CIRCUIT BREAKER 30 Amp Single Pole Circuit Breaker 1 Space Per Pole 120V

From the Manufacturer

Format 1″. Thermal/magnetic tripping mechanism. 120/240 Volt ac; 10,000 AIC. U.L. Listed as HACR type for use with air conditioning, heating and refrigeration equipment having motor group combinations and marked for use with HACR type circuit breakers. 15and 20 amp switching duty rated for switching 120 Volt fluorescent lighting loads.

Product Description

General Electric THQP120 Circuit Breaker, 1-Pole 20-Amp Thin Series

From the Manufacturer

This 120 volt GE 20 amp, single pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 2,200 watts, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1,650 watts), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110V, up to 5,500 BTU) and electric motors (3/4 hp to 1-1/4 hp). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

GE, 20a, double pole circuit breaker, 240V, bulk. The product is good to use. The product is highly durable. Manufactured in china.

From the Manufacturer

This 120/240-Volt GE 20 amp, double pole, thin series replacement circuit breaker is used in a General Electric load center. Typical applications, up to 8,800-Watt, include electric baseboard heat, fan forced heat and 240-Volt air conditioners (up to 23,000 BTU). These are only suggested applications and cannot assure compliance with all local codes. Please check local electrical codes before starting any electrical project.

Product Description

Application

GFCIs protect against electrical shock that result from ground faults. Ground faults occur when electrical current in devices stray outside of its normal path. A human body can become part of this circuit, which results in an electrical shock. GFCIs analyze the amount of current entering and existing from the circuit and will trip when the difference is greater than a certain value.

Single Pole GFCI
View larger

Single Pole Offering

Single Pole Wiring Schematic

Double Pole GFCI
View larger

Double Pole Offering

Double Pole Wiring Schematic

Siemens GFCI circuit breakers are UL Listed and CSA Certified as Class A devices. Current imbalances of 4-6 milliamps or more between load conductors will cause the ground fault sensor to trip the circuit Breaker. Note: A load neutral is not required on the circuit. However, the white line neutral (pigtail) must be connected to the panel neutral for the device to function. The Siemens 2-pole GFCI circuit breaker can be installed on a 120/240-volt AC single phase, 3-wire system, the 120/240-volt AC portion of a 240/120-volt, 3-phase, 4-wire system, or on a 208Y/120-volt, 3-phase, 4-wire system. When installed on these systems, protection is provided for 2-wire, 240-volt AC or 208-volt AC circuits; 3-wire, 120/240-volt AC circuits. The Siemens 1-pole GFCI circuit breaker is to be installed only on a single phase 120/240-volt AC system.

Features / Ratings

• Available in 1-pole (15-30 amps) and 2-pole (15-60 amps) through 60 amp rating
• Available in 10 kA and 22 kA (“H”) interrupting rating
• Suitable for a variety of construction applications: spas, hot tubs, kitchens, bathrooms, etc.
• Resists false tripping (shielded to prevent RF interference)
• Standard 1 inch per pole format with plug-in design
• UL Listed and CSA Certified
• Also available in BLF type (low tab bolt-on)
• Provides Class A GFCI protection
• HACR rated

From the Manufacturer

Siemens GFCI plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers or meter combinations. The double pole Siemens breakers may be used in 1 or 3-phase load centers and are 240V rated. To ensure the warranty on a Siemens panel is not voided, the use of Siemens breakers is required. The GFCI is intended for areas required by code to have ground fault protection, such as bathrooms, kitchens, and outdoor circuits. Check with your local electrical inspector to confirm. The use of a double pole AFCI allows for shared neutral applications in which two circuits will share a common neutral.

GE THQP220 Plug-In Mount Type THQP Feeder Molded Case Circuit Breaker 2-Pole 20 Amp 120/240 Volt AC