663 reviews analysed
1. Car Phone Mount Windshield, Long Arm Clamp iVoler Universal Dashboard with Double Clip Strong Suction Cup Cell Phone Holder Compatible iPhone Xs XS Max X 7 8 Plus 6 Plus Galaxy S9 S8 S7 Plus Note 9
Feature
- Extremely Strong Suction with switch for quick use, well adhere to your windshield or dashboard. Easy to install and no tools requires.
- Adjustable clamp can hold devices up to max 3.54 inches (90mm) for width, fits most types of phone .Red rubbers on clamp can well protect your phone not damaged. You can use this phone mount if you have a pop socket on the back of your phone.You don’t need to remove pop sockets and the clamp will avoid to damage it.
- DASHBOARD PAD & SUCTION CUP: Includes a semi-permanent dashboard disc that applies directly to the dashboard. Place the suction cup directly on top of the dashboard disc for a smooth hold.Long Flexible Arm/Gooseneck Shockproof Design allows for easy positioning, and bring device close to you. You can keep your eyes up instead of looking down at your phone.
- DASHBOARD MOUNTING: Before installation we recommend that both surface area and the product itself have a temperature above 40F. In addition, please let the dashboard pad sit for 30 minutes, before installing.Full 360 Degree Rotation with a adjustable clamp head, you can adjust your phone for good viewing.
- iVoler UPDATE VERSION 6 Inches Long Arm/Neck Car Mount With Strong Suction of Three layers and X Clamp, provide you perfect viewing angle while driving your vehicle. Compatible with iPhone X 8 8 Plus 7 7 Plus 6 6Plus 5 SE , Galaxy S5 S6 S7 S8, Google, LG, Huawei and almost all for any device’s diagonal screen between 3.2–6.0 inches.
2. 3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket
Feature
- For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back.
- Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads.
- NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous surfaces. 3.The 3M VHB adhesive pad for dash mount phone holder is one-time use. 4.Please wait at least 24 hours ensure the sticker get the best stickiness. 5.This magic mount adhesive replacement and car mount sticky pad replacement can be a Christmas gifts 2019.
- Easy Remove and Reattach Car Mount Sticky: These flexible double sided mighty magnetic car mount self adhesive is esay to remove, you can remove dash tray car mount stand without leaving adhesive residue. These car interior cellphone mounts 3M adhesive replacement is easy to reattach, no tool required, just peel and stick. 4pcs alcohol prep pads provided, remember to clean your cell phone holder base and dashboard surface carefully before pasting. Best car phone mount adhesive replacement.
- Warranty: Volport products provide 12 month warranty. Package comes with 5 pieces universal adhesive for ball car mount for car dashboard, 4 pack universal alcohol pads for cleaning. Sticker can use be on flat hard surface like home bathroom mirror, refrigerator, bed post, wall, locker, office, dash cam. Compatible with iPhone 11 Pro Max, iPhone 11 Pro, iPhone 11, iPhone XS Max, iPhone XR, ipad；Samsung Galaxy Fold, S10 Plus, S10, S10 e, note 9；Huawei P30 Pro, LG G8 ThinQ
- Google Pixel
- GPS.
3. IPOW Upgraded X-Shaped Double Clamp Universal Long Shockproof Arm Phone Car Mount Windshield/Dash With Strong Suction Cup,Cell Phone Holder Compatible With iPhone 8 8 Plus X 7 7 Plus 6Galaxy S9 S8
Feature
- 【Compatible Enough】Fits almost all phones with phone case like wallet phone case, ring holder,
- 【Upgraded Easier to open X-shaped Double Clamp】Upgraded from July 6,2018.Female can open it with 2 fingers easily,don’t need too much strength.Can extend to 3.54 inches at most and holds your phone snugly as your hands do.
- 【Upgraded More Easily Adjustable Durable Arm】With thicker and softer embedded aluminum alloy rod which is easier to blend and won’t loose its position when driving.
- 【Stronger Suction Cup】The vacumm suction cup uses stronger better spring lock inside which won’t break.It will stick tighter to the wieldshield or dashboard .
- 【Upgraded Longer Arm】The arm is 7.6″ long while old version is 7.2″. Helps you get the best viewing angle of your phone.
4. Car Phone Mount, Vansky 3-in-1 Universal Cell Phone Holder Car Air Vent Holder Dashboard Mount Windshield Mount for iPhone Xs Max R X 8 Plus 7 Plus 6S Samsung Galaxy S9 S8 Edge S7 S6 LG Sony and More
Feature
- ☑️ [3-In-1 Car Mount Solution] – Vansky car phone mount can be wall-mounted or clipped to your car’s air vent / dashboard mount / windshield phone mount for convenience.
- ☑️ [Easy & Quick Installation] – No tools required. Easy one press button to releases the clamps on your phone with just a push of a finger.
- ☑️ [360 Rotation] – The 360 degree rotatable phone holder for car lets you find the perfect angle to view your Smartphone at a quick glance.
- ☑️ [Strong Suction Cup] – Features strong suction cup that will hold your device steady so you can keep your focus on the road and your hands on the steering wheel.
- ☑️ [Compatibility] – The car mount can securely attach your Smartphone phone between 3.5 inches and 7 inches. Extendable grip accommodates phone between 6.7-9.7cm width, including but not limited for iPhone 5 5s 6 6s Plus, Samsung series, LG series and others 3.5-7 inches Smartphone and with its soft padding, securely holds your device.
Description
Vansky 3-in-1 Car Phone Mount – 3 ways for your choose, whatever you want! Multi functional, Rotatable, Convenient, Steady3-in-1 Smart design Vansky car mount not only has the 3-in-1 usage in dashboard, windshield or air vent, but it is also equipped with 3 holders in one package: one holder one mount. Users can use three of them without any disassembly at the same time and can service multiple devices and vehicles for your needs. Features: Multifunctional, Convenient, Steady, Safety Over current and over voltage protection Full 360-degree adjustable rotation for optimal viewing angle Adjustable holder to view your device at any angle or orientation while driving Easy install- Easy one press button releases the device with just a push of a finger Compatible with most smartphones, GPS, pad, MP3/MP4 players, etc Package Included: 1 x Vansky Universal Bracket1 x Windshield Mount1 x Dashboard Mount1 x Air Vent Holder1 x User Manual: At Vansky, we stand strongly behind the craftsmanship of our products. That’s why we them with 45 Days Money Back & One Year Hassle Free and provide Friendly, Easy-to-reach Support.
5. 3M Sticky Adhesive Replacement APPS2Car Dashboard VHB Sticker Pads for Magnetic Phone Car Mount,Car Phone Holder Parts,4 Pcs Double Sided VHB Mounting Pads Car Phone Mount Base Sticker Tapes
Feature
- ➣Strong Stickness: Original 3M VHB stick adhesive pads,Double sided self sticky,1.55mm thickness black VHB adhesive pads,stronger than most adhesive pads.
- ➣Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator,bed post, wall, locker, office, driving personnel and other related equipment replace.
- ➣Rectangular 3M VHB sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, which is stable even in bumpy roads.It is a strong sticky adhesive replacement for phone car mount.Compatible with Wizgear,Bextrix,Scosche ,Trainium ,PLDHPRO ,Ailun etc.magnetic phone car mount.
- ➣This 3M VHB adhesive pad is high temperature resistance and low temperature resistance,water-proof,Tear off non-trace.
- ➣NOTE:(1),Please don’t stick the 3M adhesive pad on very soft, rugged, texture,grease surface or leather surface.(2),Make sure the desired surface is clean and dry.(3),The 3M VHB adhesive pad is one-time use.(4),It is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use.(5),WORRY-FREE:APPS2Car comes with best-in-class customer service,and lifetime warranty.Please contact us immediately if you have any problem.
Description
NOTE:
1,Please don’t stick the 3M stick adhesive pad on very soft, rugged, texture,grease surface or leather surface.
2,Please remove the residual glue and clean the surface.
3,The 3M VHB adhesive pad is one-time use.please sealed preservation.
4,It is Recommended to wait at least 24 hours after stuck before using.The longer the adhesive time, the stronger the viscosity will be.
5,Peel off the yellow protective film and press it at least 2 minutes then wait for about 2 hours before peel off the other side red film.If the red protective film is hard to peel off, please press it back once and try to peel off it again, don’t touch the gel with your hand after peel off.
Easy installation：
Step 1,Remove the residual glue.
Step 2,Clean&dry the car phone mount base completely.
Step 3,Tear off the yellow protective film.
Step 4,Stick it on the car phone mount base and press it at least 4 minutes for better connecting to the base,then wait for about 2 hours to tear off the other side red film.
Step 5,Clean and dry the smooth and hard flat surface thoroughly to ensure there is no dust or debris.
Step 6,Tear off the other side red protective film,Then stick it on the cleaned dash surface firmly and press it at least 5 minutes to ensure that the adhesive pad and the surface fully bond.It is recommended to wait for at least 24 hours before use.
If you hard to tear off the red protective film, please press it back ,then tear off it again.Don’t touch the gel with your hand after peel off the film.
Package include:
4 X 3M VHB adhesive pads
1 X use manual
6. Custom Accessories 18003 12V Dual USB Under Dash Mount
Feature
- The dual 12V and USB power outlet is the permanent solution to making sure your electronic devices always have a full battery
- USB port charger outputs 5VDC up to 2.1 amps for quick charging
- Designed with a built-in automatic overload reset system to protect your electronic devices
- Mount under the dash for quick installation
- This unit direct connects into you 12VDC system
Description
Add a permanent 12 volt socket and dual 2.1A USBs ports to your vehicle or camper with a hardwire, mounted unit by Custom Accessories. This unit direct connects into you 12VDC system. Includes an under dash mounting bracket and has a built-in automatic overload reset system. The chargers can be used with your smartphones and tablets; powering up to 2 devices at one time.
7. ClutchIt The Original Dual Magnetic Movable Phone Holder and Tablet Mount (Matte Black)
Feature
- BUY WITH CONFIDENCE! – High grade aircraft aluminum and strong metal components. The perfect strength magnet to hold your cellular device securely! Full instructional booklet included so you won’t have any problems installing the magnetic car holder! Compatible with any smartphone and tablet
- PATENTED MOVABLE DOUBLE PIVOTING DESIGN – This handsfree magnetic-mount is the world’s first anywhere dual magnetic phone holder. Tablets? Not a problem. Clutch mount can support any device up to two pounds not just mobile smartphones or tablets to any desired area. Flexible, Bendable, Portable, Adjustable, Rotating, Handsfree. No More Selfie-stick
- THE PERFECT SOCIAL MEDIA COMPANION – Whether streaming, vlogging, makeup tutorials on your vanity mirror to hands-free webcam commentary, there is no limit to how you can Clutchit. No digging it out of your pocket or purse or dropping it on the car floor. Strongest Sturdy construction and quality magnetic power keeps your phone where you want it! The Clutchit phone mount design is superior to any other cradle holders on the market
- ACCESSORIES INCLUDED – 2 Thin Metal Plates for any object of your choice including Universal Compatibility with any Smartphone, Tablet or Case! 1 Thick Metal Disc for your Dash or Surface. We only utilize the finest gel base adhesive and materials that you would never find on lower quality cheap phone mounts. Step by step instructional pamphlet
- ONE MOUNT, HUNDREDS OF USES – Clutchit Magnetic Mount is the perfect travel companion that moves with you – Automobile dashboard, windshield, hands-free selfie, Kitchen Table, boat, office desk, gym yoga vlogs, home, refrigerator, stove-top, shower, bath-tub, bed-room, wall, desktop. Other vehicles such as your motorcycle, bike handlebars, ATV, scooter, moped, minivan, jeep, truck, motorbike, dirtbike or anywhere you need hands free convenience
8. Metra 95-7870T Double DIN Installation Dash Kit for 2005-up Honda Ridgeline (Tan)
Feature
- Automotive-grade abs plastic provides factory finish
- Also available in factory colors 99-3000b blue 99-3000g gray 99-3000bg beige 99-3000br brown and 99-3000r red
- Snap-in quick release iso mount brackets.Wiring and antenna connections(sold separately):70-1721 Honda/Acura harness 1998-up,70-1729 Honda harness 1998-up,40-HD10 Honda antenna adapter 2005-up
- Install dash kit for Double DIN/ISO Radios
- Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
- Painted Tan to match factory dash color
- High-grade ABS plastic construction
- Factory style texture
Description
Specially designed for ISO mount radios. Comes with under-radio CD Jewel case pocket. High-grade ABS plastic with factory texturing. Automotive-grade ABS plastic provides factory finish. Also available in factory colors 99-3000b Blue 99-3000g Gray 99-3000bg Beige 99-3000br Brown and 99-3000r Red. Snap-in quick release ISO mount brackets.
9. Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1990-Up GM Vehicles
Feature
- Install dash kit for Double DIN/ISO Radios
- Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
- Painted to match factory dash color
- High-grade ABS plastic construction
- Factory style texture
- Install dash kit for Double DIN/ISO Radios
- ISO Stacked Radio Provision, Easy to use Instructions, High Grade ABS Plastic, It is compatible with Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Pontiac and Isuzu Select Models
- Painted to Match Factory Dash Color
- Factory style Texture
- Designed and Manufactured with Precision Tolerances, Resulting in a Gapless fit between the Dash and the Kit
Description
Double DIN Installation Dash Kit for Select 1990-Up GM Vehicles
10. BATIGE USB 3.0 & 3.5mm Car Mount Flush Cable 3.5mm + USB3.0 AUX Extension Dash Panel Waterproof Mount Cable For Car Boat and Motorcycle – 3ft
Feature
- This batige cable designed for in car but can be used for any application, such as bike, marine, etc.
- Use an existing hole or cut a hole in your dashboard and clip in the socket to flush mount it to your vehicle’s dash.
- Bracket included to allow mounting of socket on your car’s dashboard.
- Works with vehicles with 3.5mm AUX or USB 3.0 Input for extension/mount.Water Proof Mount Rubber cover
- Ideal for newer aftermarket head units such as Pioneer, Kenwood and Alpine that feature a rear USB input
Description
BATIGE USB 3.0 & 3.5mm Car Mount Flush Cable 3.5mm + USB3.0 AUX Extension Dash Panel Waterproof Mount Cable For Car Boat and Motorcycle – 3ft
Features:
Works with vehicles with USB 3.0 & 3.5mm AUX Input
Designed for in car but can be used for any application
Use an existing hole or cut a hole in your dashboard and clip in the socket to flush mount it to your vehicle’s dash.
Bracket included to allow mounting of socket on your car’s dashboard.
Can be plugged into any car stereo equipped with a AUX input.
Mounting options:
Flush mount the socket to your dashboard or other surface
Mount to dash using the bracket and screws see the picture Can be plugged into any car stereo equipped with a AUX input.
Package include:
1 x BATIGE 3.5mm USB 3.0 car mount cable
1 x Accessories
Conclusion
By our suggestions above, we hope that you can found Double Dash Mount for you.Please don’t forget to share your experience by comment in this post. Thank you!
