597 reviews analysed
1. Dual Channel TENS EMS Unit 24 Modes Muscle Stimulator for Pain Relief Therapy, Electronic Pulse Massager Muscle Massager with 10 Pads, Dust-Proof Drawstring Storage Bag，Fastening Cable Ties
Feature
- Multi-functional Tens Massager with 24 Preprogrammed Massage Modes for Pain and Muscle Relief. TENS unit help reduce pain and muscle spasms caused by a wide range of conditions including: arthritis, period pain, knee pain, neck pain, back pain, sports injuries.Tens muscle stimulator is a powerful weapon in your fight against chronic pain.
- Free Dust-Proof Drawstring Storage Bag, Reusable Fastening Cable Ties and 10 Pcs of Self Adhesive Conductive Reusable Pads. No more cable mess after use with fastening cable ties. A quick and easy solution for tens lead wires management. Hassle free storage system for the tens massager and wires.
- Non-Invasive, Non-Drug Choice for Relieving Pain. Great Device You Can Use at Home for Pain Management. If you have chronic or acute pain, just trying Belifu TENS massager for relief. It is with human body simulation technology, microcomputer intelligent control technology, simulates a variety of massage methods. Help for treating back pain, arthritic or inflamed discs/ joints, shoulder tension and muscle Relief.
- A/B Dual Channels with 24 Modes, 20 level Intensity and Time Control. relax Any Time Anywhere with Pocket Size! You can operate it with different intensity settings for each channel. With portable size, it can be used in the office, car or travel on the go.Total body relaxation: use for back, knee, shoulder, ankles, wrist and elbow and make this the most powerful weapon for your body relax.
- Built in Powerful Rechargeable Lithium Battery– up to 20 Hours of Continuous Use. It can be connected to wall charger, power bank or laptop USB port to charge. Don’t worries about treatment interruption for dead AA batteries any more. With battery level indicator remind you charge timely.
2. 25 Sqft Mat, Warming Systems 120 V Electric Tile Radiant Floor Heating Mat with Programmable Thermostat
Feature
- 25 Square Foot Under Tile Heating Mat, Mat is 20″ Wide x 15′ Long, 120 Volts, 2.5 Amps, 300 Watts
- Highest Quality Heating Cable, Twisted Pair for Zero EMF, Single Cold Lead, Very Thin
- Mesh can be cut (do not cut wire) to heat other shapes.
- Includes Honeywell/Aube Digital Floor Sensing Thermostat with Floor Sensor Wire(model TH115-AF-120S) and Installation Monitor
- UL LISTED for USA and Canada. 25 Year Warranty.
3. Aluminum Tape/Aluminum Foil Tape – Professional/Contractor-Grade – 1.9 inch x 150 feet (3.4 mil) – Perfect for HVAC, Duct, Pipe, Insulation and More – By Impresa Products
Feature
- PROFESSIONAL / INDUSTRIAL GRADE: High-quality, high tensile strength aluminum foil coated in epoxy resin with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive and provide ease of use
- WIDE VARIETY OF USES: Ideal for an array of uses, including general repair, sealing hot and cold air ducts (excellent HVAC tape), duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing, etc.
- HOLDS UP TO WHATEVER YOU THROW AT IT: Resists flame, moisture / vapor, UV degradation, odor, weather, some chemicals and smoke transmission. Good for both indoor and outdoor use. Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective
- STICKS TO VIRTUALLY ANYTHING AT HIGH AND LOW TEMPS: Our aluminum foil tape provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces
- LOTS OF TAPE MEANS A GREAT VALUE: 1.9 inches wide x 150 feet (50 yards). 1.7 mil foil and 1.7 mil backing. Performs from -20 F to 220+ F. Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape
Description
TESTED, TRUSTED AND BACKED BY OUR TOP-RATED WARRANTY AND CUSTOMER SERVICE
PROFESSIONAL / INDUSTRIAL GRADE: High-quality, high tensile strength aluminum foil coated in epoxy resin with strong, cold-weather solvent acrylic adhesive set on a easy-release silicone paper liner to preserve the adhesive and provide ease of use
WIDE VARIETY OF USES: Ideal for an array of uses, including general repair, sealing hot and cold air ducts (excellent HVAC tape), duct insulation systems, sealing aluminum, stainless and plastic seams / joints, temporary repair of metal surfaces, copper pipe fixing, etc.
HOLDS UP TO WHATEVER YOU THROW AT IT: Resists flame, moisture / vapor, UV degradation, odor, weather, some chemicals and smoke transmission. Good for both indoor and outdoor use. Chemically resistant, thermally conductive (helping cooling/heating efficiency), heat and light reflective
STICKS TO VIRTUALLY ANYTHING AT HIGH AND LOW TEMPS: Our aluminum foil tape provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces
LOTS OF TAPE MEANS A GREAT VALUE: 1.9 inches wide x 150 feet (50 yards). 1.7 mil foil and 1.7 mil backing. Performs from -20 F to 220+ F. Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape
4. Juvale 3 Pack Hose Clamp Pliers – Pinch Pliers – Line Clamps for Brake Hoses, Fuel Hoses, Gas Lines, Coolant Hoses, Radiator Hoses, Most Flexible Hoses, Red
Feature
- HOSE CLAMP PLIERS: Includes 3 heat-resistant nylon pliers for closing off flexible hoses. These pliers can lock into position leaving your hands free to repair. Not for use on rigid, reinforced, or high pressure lines.
- ALL THE RIGHT PROPERTIES: These clamps are durable, light weight, non-condutive and rust-proof.
- CLAMPS FLEXIBLE HOSES: Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more!
- VALUE PACK: Get 3 hose clamp pliers at a value price! Make sure to always have some on hand when you need them.
- DIMENSIONS: Large pliers measure 9-15/16 x 3/4 x 2-1/8 inches
- Medium: 7-3/16 x 3/4 x 1-7/8 inches
- Small: 6-1/8 x 5/8 x 1-5/8 inches.
Description
When you’re looking to clamp-off a hose reach for these hose clamp pliers! These pliers close off flexible hoses while leaving them undamaged. Use the locking mechanism to leave your hands free to repair! These pliers are heat resistant, lightweight, non-conductive and rust-proof.
To prevent serious injuries please adhere to the guidelines below:
*Wear ANSI-approved safety goggles during use.
*Use only for repair and remove from the car after use.
*Keep hands and clamp away from radiator fans.
*Do not use on the damged hoses.
*Do not use if the clamp has loose parts.
5. Duck Brand HVAC Duct Sealing Tape, Silver, 1.88 Inches x 30 Yards, 1 Roll (1404523)
6. Southwire 55666623 Primary Wire, 16-Gauge Bulk Spool, 100-Feet, Black
Description
This item is 16 Gauge 19 Strand Primary Auto Wire . Used for Electrical & Heating, Rough Electrical. The Product is manufactured in United States.
7. Shurtape AF 100 UL 181A-P/B-FX Listed/Printed Aluminum Foil HVAC Tape with EasyPeel Paper Liner, HVAC Joint Sealing Tape, 2.5" x 60 Yards, Silver, 1 Roll (155206)
Feature
- Printed aluminum foil tape with EasyPeel paper liner
- Paper Release Liner: 6.8 mils thick with liner
- 4.2 mils thick without liner
- Excellent adhesion to rigid fiberglass duct board and flexible air duct
- Flexible and easy to use to create airtight bonds with Acrylic based adhesive
- Superior stability during extreme fluctuations in temperature from -20 to 260 degrees Fahrenheit and in humid conditions
Description
UL 181A-P/B-FX Listed and printed aluminum foil HVAC tape for joining and sealing joints, connections and seams on rigid fiberglass duct board and flexible air duct. A hot or cold temperature tape that does it all. AF 100 is engineered to form airtight bonds on joints and seams in application temperatures ranging from -20 degrees Fahrenheit to 260 degrees Fahrenheit and in humid and water vapor conditions.
8. SPECTRA 360 12-08 Electrode Gel (Pack of 2)
9. ANTCLABS BLTouch : Auto Bed Leveling Sensor/To be a Premium 3D Printer (With 1M Extension Cable Set)
Feature
- BLTouch is an auto leveling sensor for 3D Printers based on open-source.
- Simple, Smart, High-precision.
- It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
- Come with 1m extension cable set
- [Note] Firmware Update: This item requires a firmware update. Please check the manufacturer’s instruction page: antclabs.com/bltouch-2.
Description
Main functions and controls of BLTouch are same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board.
BLTouch fulfilled simple structure and high precision by using progressively designed solenoid and hall sensor, and aimed user convenience and enjoyable printing by adding many smart functions, self-test, alarm, alarm release, test mode for M119.
Features:
- Simple: BLTouch can be easily applied, since it has a small and simple structure. Gathering information and firmware setting will be an easy task, because BLTouch works as usual auto bed leveling sensor.
- Self-test: The push pin is operated three times to test when the power is on.
- Alarm: The LED light blinks if a problem found on a self-test or on an operation.
- High-precision: BLTouch’s Standard Deviation in repeatability is around 0.005mm.
10. Yakamoz 3pcs Precision Reverse Ceramic Tweezers Non-Conductive, Heat Resistant, Anti-Magnetic Pointed & Curved Tips Tweezer Set for Pinching Coils While Firing
Feature
- 3 Different Ceramic Tip Shape: These ceramic tips are pointed and curved for Precision work and firm grips on hot coils or electronic circuits. One of the most needed tools for any RDA/RTA rebuilder or Electrician.
- Unique Reverse Design: Cross locking, self-closing design can improve work efficiency. These reverse tweezers will give you unexpected effects in some special situation.
- Quality Material: Precision-made for those precise adjustments to your coil while firing. Non-Conductive & Heat Resistant will prevent your coil from shorting while firing.
- Long Life Use: Manufactured with high quality metals and ceramics with tight tolerances and thresholds. Ceramic tips are smooth, solid and anti-magnetic, ideal choice for precise electrical operation.
- Wide Application: Can work at high temperature(3000F) for a long time and wook good at acidity situation, SMD, soldering point, accurate mechanics, drug operation, clean room, vaping etc.
Conclusion
By our suggestions above, we hope that you can found Conductive Heating Line for you.Please don’t forget to share your experience by comment in this post. Thank you!
