Finding your suitable readers for cnc spindle water cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cnc spindle water cooling including detail information and customer reviews. Let’s find out which is your favorite one.
738 reviews analysed
1. MYSWEETY 1Set DIY 110V 2200W Air Cooled Spindle Motor CNC Spindle Motor 80MM 2.2KW + 110V 2.2KW Converter + 13pcs ER20 Collet + 80MM Clamp
- 110V 2.2KW Air Cooled Spindle Motor, 2.2KW 110V HJ Inverter, don’t need any transformer, easy for you to use.
- Runout off: less than 0.005mm, Speed:0-24000rpm, AC Inverters, Frequency of Inverter: 0-400Hz
- 13PCS ER20 Collet Set Gripping Range:(1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm)
- The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
- 100% satisfactory, if you have any problem, please contact us, we will help your money back.
2. 220v 2.2KW Water Cooled Er20 Japanese Bearing CNC Spindle Motor and Matching 2.2kw Variable Frequency Drive Inverter
3. Square Air Cooled Spindle Motor 2.2KW ER20 24000rpm 220V 6A 400Hz CNC Engraving Router Milling Grinding Cutting Machine【Suitable for Small or Medium Processing】
- 4pcs bearing,runout off less than 0.01mm, power factor is aound 0.82-0.87.
- Precision Tapered Bore: less than 0.005mm. Notice:The spindle speed can’t lower than 9000rpm!!!!
- Wiring:The spindle’s terminal U1 connect Inverter’s U,spindle’s terminal V1 connect Inverter’s V,spindle’s terminal W1 connect Inverter’s W,the inverter’s terminal R ,S , T any 2 pins connect 220VAC.
- High quality 4pcs bearings (C7005x2 + C7002x2),P4 class.
- Main application:Wood, Aluminum, Glass, PVC industry.The Spindle motor Mainly suitable for non-metallic engraving.
1 x 2.2Kw Square ER20 Air-Cooled Spindle Motor (220V,24000rpm,4 bearing,400Hz)
Material: Stainless Steel
Runout off: Less than 0.01mm
Precision Tapered Bore: Less than 0.005mm
Bearing Lubrication: Grease
Collet Size: ER20
Bearings: 4pcs high quality bearing,P4 class
Power Supply Interface:Connector
Wiring:The spindle’s terminal“U1”connect inverter’s“U”spindle’s terminal“V1”connect inverter’s“V”spindle’s terminal “W1” connect inverter’s “W”the inverter’s“R”,“S”, “T”any “2” terminal connection “220VAC”
Wood, Glass, PVC industry
If you need to buy a frequency converter, we recommend these two models:
4. Upgrade Version Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
- The nebulizer gas and coolant is adjustable, easy to use on different processing conditions
- Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up
- Widely Used – In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
- Not only increases the machining cutting speed, save time and reduce processing costs and tool wear
- Even the super-hard alloy precision machining the workpiece can achieve a smooth surface
1. Clean the liquid shall be used
2. Do not use liquid-corrosive
3. In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2(atomization and gas, associated gas pressure)
4. Use the liquid viscosity at 68cSt or less
50 x 30 x 20mm / 2 x 1.2 x 0.8inch
Hose about 1.5m
Package Weight: 200g / 6.9oz
1 x Mist Coolant Spray System
Hose: about 1.5m
For 8mm air pipe
For CNC Lathe Milling Drill Machine.
Cooling stone / metal / ceramic tile engraving machine.
5. 80W Electric Submersible Pump Spindle Motor Cooling Water Pump for CNC Engraving Machine – CN Plug 220V
- ✔ Submersible — This is a submersible water pump applicable for 0.8/1.5/2.2kW water-cooling spindle motor, strong power and high lift, max lift height: 3.5m / 11.5ft, 80W high efficiency motor.
- ✔ Well Sealed — Internal circuit is well sealed to protect from water, durable structure and a compact design to ensure that the submersible pump can be used again and again without corrosion.
- ✔ Long Lifespan — ABS housing has good resistance to heat and impact, ensuring long lifespan of the pump, 4 strong suction cups at the bottom of the pump help keep it in place, help keep it in place.
- ✔ Water Control — The water pump must fully immersed in water to use, water flow control, an adjustable knob to control the water flow rate, so you can get just the amount of water pressure you want.
- ✔ Wide Application — Suitable for CNC machine, aquarium tank, water fountain, etc, circulate and aerate the water, making it more attractive to your fish or turtles, perfect for aquarium, fountains, and hydroponic systems, etc.
This is a submersible water pump applicable for 0.8/1.5/2.2kW water-cooling spindle motor. Internal circuit is well sealed to protect from water. ABS housing has good resistance to heat and impact, ensuring long lifespan of the pump. The water pump must fully immersed in water to use. Suitable for CNC machine, aquarium tank, water fountain, etc.
Plug type: CN plug
Voltage: AC 220V
Material: ABS + metal
Drive method: Electric
Rated power: 80W
Pump lift: 3.5m / 11.5ft
Applicable range: cooling 0.8/1.5/2.2kW water-cooling spindle motor
Weight: Approx. 1063g / 37.5oz
1 * Water Pump
1. Please kindly make a note if you need any plug adapter.
2. Do not idle running the pump without water.
6. 500W Spindle Motor, Cooled CNC Spindle Milling Motor 0.5KW 52MM ER11 cnc Spindle Motor DIY DC 100V For PCB Milling Machine
- Air Cooled Spindle – 110VAC MACH3 – Analog Input
- Torque: 5000G/CM
- High precision spindle run out 0.01-0.03
- Speed: Up to idle up to 11000 rev / min
- Operating voltage: 100VDC
- Power: 500W
- Spindle diameter: 52mm
- Can be used for wood carving PCB drilling, applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc
- 100% service satisfactory. We provided this spindle with 30 days free replacement or refund, 1 year warranty and whole life customer service from the date of purchasing.
7. 【The Best Deal】OriGlam Mist Coolant Lubrication Spray System for Metal Cutting Engraving Cooling Sprayer Machine for Air Pipe CNC Lathe Milling Drill
- √ Great Value – Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.
- √ Working Safer – Gas processing chips are blown away, working safer
- A lot of water problem solving tools, easier to clean up.
- √ Save Time – Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.
- √ Easy To Use – Air flow and spray mist volume adjustable design, easier to use.
- √ Widely Used – In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.
8. CNC 500W Spindle Motor 0.5kw Air Cooled Milling Spindle Motor 110V MACH3 Speed Power Converter with 52mm Clamp and 13pcs ER11 Collet for DIY Engraving Engraver Machine by TopDirect
- Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM
- Diameter: 52mm, Chuck portion length: 45mm, Chuck portion diameter: 16mm
- 13pcs ER11 Collect Set Gripping Range: 1MM to 7MM (1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm)
- Comes with:1x500W Spindle Motor,1xSpeed Power Converter,1x52mm Clamp,1x13pcs ER11 Collet
- 100% service satisfactory, if you have any questions, please do not hesitate to contact us.
9. SHINA Mist Coolant Lubrication Spray System For Metal Cutting Cooling Milling Engraving Machine CNC Lathe Cooling Sprayer Machine(Manual Valve 550mm)
- 1.Universal angle: 360 degree angle is free to fix, user-friendly design is more convenient.
- 2.High temperature resistance, durable: multi-size optional, universal angle, free to fix.
- 3.The nebulizer gas and coolant is adjustable, easy to use on different processing conditions.
- 4.It can increases the machining cutting speed, save time and reduce processing costs and tool wear.
- 5.Air flow and spray mist volume adjustable design, easier to use.
2.Tube Size:550mm(pls allow 1-3cm errors).
3.Feature:easier to use,Angle fixed at random.
5.Product type:Manual valve.
1 x Mist Coolant Spray System
1.Clean the liquid shall be used.
2.Do not use liquid-corrosive.
3.In the liquid without pressure output required to ensure that the air
pressure in the range 5-7KGF / CM2. (atomization and gas, associated gas
4.Use the liquid viscosity at 68cSt or less.
1.Please allow 1-3cm error due to manual measurement. Please make sure you do
not mind this before you place order.
2.Due to the difference between different Computer monitors, the picture may
not reflect the actual color of the item, please understand. Thank you.
10. Huanyang Water Cooled CNC Spindle Milling Motor 110V 800W 24000RPM 400hz ER11 Collet
- The item is Water Cooled 110V-800W 4 bearings Φ65mm 400hz spindle motor.(come with a 6mm collet)
- NOTE:Need to be equipped with frequency converter to use.Rated frequency of spindle is 400 Hz,If you input 110v voltage at 50hz or 60hz, it will damage the spindle
- stable performance,high precision bearing
- operating speed:6000rpm-24000rpm
- Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
The bearing adopts high speed angular contact bearing.And shell is cooled by liquid cycle to reduce the heat rise caused by high-speed rotation.
Adopt precision steel ball holder to ensure the rotation precision of the spindle in high speed grinding.
Lubricated with grease, which is resistant to 200 degrees high temperature.
●Material: The cover is made of stainless steel, and the water jacket is high compression casting aluminum tube, red copper coil.
●Bearing: 7002 bearing (2pcs), 7000 bearing (2pcs)
● Voltage and rated current: AC 110V, 7.2A
● Max Rotation Speed:24,000 RPM
●Coaxality: 0.025mm (2.5 microns)
● Frequencies: 400Hz
●Size: Size: 65*195 (mm)
●Collet:ER11 collet, 6mm is standard
●Nut model: ER11-A(B)
●Cooling way: water cycling cooling way
●Lubrication way: high temperature resistance grease lubrication
●Power interface: GX16 water proof aviation plug marked with number 1, 2, 3, 4. Number 1, 2 and 3 interfaces are connected with inverter power U, V, W respectively. Number 4 is connected with earth wire
By our suggestions above, we hope that you can found Cnc Spindle Water Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!