
980 reviews analysed
1. QPN Club Car DS Precedent IQ Speed Sensor Motor Magnet for GE Motors
Feature
- Stock Motor Magnet – This is NOT a High Speed Magnet, This Magnet WILL NOT Increase Your Carts Speed.
- Installation Process Outline in Product Description below
- Fits the Following Cart(s): Club Car DS & Precedent (IQ) models with GE motor ONLY!
- This replaces the magnet in the speed sensors, not the whole sensor itself
- GE Motors ONLY.
Description
Installation of the magnet is a simple process: 1 – Flip the Tow/Run Switch to the TOW position (this should be done whenever you are servicing the cart) 2 – Disconnect main positive and negative battery cables to your cart 3 – Remove the GE speed sensor from the end of your cart motor 4 – Now you can gain access to the magnet. Simple remove the magnet by using a small flat head screwdriver or socket 5 – Install the new magnet in the same position you just remove the old magnet from 6 – No just re-install the speed sensor, re-attach the battery cables, and run the Tow/Run switch back to the RUN position.
2. 9.99WORLD MALL Golf Cart IQ Speed Sensor for Club Car DS and Club Car Precedent 2004-up GE Motor, Old Style, OEM# 102704901
Feature
- Golf Cart IQ Speed Sensor
- Fits Club Car DS and Precedent 2004-up electric golf cart models with GE Motor
- Fits Club Car DS and Precedent (IQ) models with ADC motor ONLY
- We recommenced visually verifying that this is the style speed sensor currently on your cart before purchasing as some carts that have had the motor replaced may employ the top hat style sensor instead of the one that originally came on the cart.
- You can easily check by looking at the end of your motor where the sensor is located.
Description
Golf Cart IQ Speed Sensor for Club Car DS and Precedent 2004 & up electric golf cart models with GE Motor
This brand new high quality speed sensor replaces your worn or broken factory speed sensor
Also compatible with some Yamaha and EZGO carts, please contact us if you are unsure about comparability with your cart.
3. 10L0L.EZGO Yamaha GE Motor Club Car Speed Sensor Club CAR Precedent Electric 2004 and Newer,for GE Motor,Three Wire Sensor with snap in plugg
Description
10L0L.EZGO YAMAHA GE Motor Club Car Speed Sensor CLUB CAR Precedent electric 2004 and newer,For GE motor,Three wire sensor with snap in plugg
Quality Guarantee: Good Quality Level, Each item will be Test and in good shipping.
This item Ship by from Hongkong , will take 7-15 workdays to arrive
Kindly Note: Professional Repair Skills are need, Please reference to YouTube for install Guide before Your DIY Or to contact our customer service staff to provide you with the installation diagram
4. Club Car Speed Sensor for Club Car DS, IQ, Precedent Golf Carts – GE Motor – 102265601
5. Club Car IQ High Speed Motor Magnet | DS/Precedent 48V Electric Golf Cart Sensor – ADC Motor – By Automotive Authority LLC
Feature
- Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades
- Fits the Following Cart(s): Club Car (IQ) models with ADC motor ONLY!
- Very Simply Install Instruction: View them below
- Most can expect to see 2-8 MPH gain depending on the health of your batteries
- If you have questions regarding if your Club Car has a IQ system with ADC motor or a GE motor please contact me. The easiest way to tell is by checking the serial number prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you have a cart with a IQ system. You can also look at the motor controller part number. If your model number starts with “1510” then you also have an IQ system.
Description
Installation Instructions: 1: Flip the Tow/Run Switch to the TOW position (this should be done whenever you are servicing the cart) 2: Disconnect main positive and negative battery cables to your cart 3: Remove the ADC speed sensor from the end of your cart motor 4: Now you can gain access to the magnet. Simple remove the magnet by using a small flat head screwdriver or socket 5: Install the new magnet in the same position you just remove the old magnet from 6: No just re-install the speed sensor, re-attach the battery cables, and run the Tow/Run switch back to the RUN position. If you have questions regarding if your Club Car has a IQ system with ADC motor or a GE motor please contact us. The easiest way to tell is by checking the serial number prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you have a cart with a IQ system. You can also look at the motor controller part number. If your model number starts with “1510” then you also have an IQ system. This magnet will fit, but will NOT work on vehicles equipped with the Excel system. Excel vehicles have serial number prefixes of PH, PJ, PU or PD This magnet is a “half-pulse” magnet. Once installed on your motor it will still communicate to the speed sensor exactly as the other magnet did, but only half as often. This magnet won’t give you a boost of power or torque it merely raises the electronic rev limiter so high that the vehicle will never reach it. In turn, you will be able to run the full potential of your vehicle..The regenerative motor braking becomes completely disabled when this magnet is installed and will allow you to “free-wheel” down hills. The magnet in this listing will fit any Club Car vehicle with the IQ drive system that is equipped with an ADC motor. There were two motors available with the IQ system. 1. GE – The GE is grey in color and uses a snap-in speed sensor. 2. ADC – The ADC motor uses a speed sensor shaped like a top hat that bolts on.
6. Club Car Iq High Speed Motor Magnet | Ds/Precedent 48V Electric Golf Cart Sensor
Feature
- Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades.
- Our parts meet or exceed OEM quality standards.
- FLIP YOUR TOW/RUN SWITCH BEFORE INSTALLATION. Simply jack up the rear of your cart, remove your passenger side tire, remove (2) screws holding speed sensor to motor, replace magnet in motor, and re-install!
- Fits the Following Cart(s): Club Car (IQ) models with ADC motor ONLY! Please look at additional photos or call if you are unsure this will fit.
Description
(WANT SPEED?) Well there is no better way to improve your 0-20 time at a better price! Very simple��install the magnet in a matter of minutes and GO. This high speed motor magnet will increase the speed of your cart from 3-6 MPH based on your carts condition (This is not a guarantee). Does not matter if your Precedent speed setting is 3 or 4 you will still get results without any loss of torque.
7. 10L0L Club Car Speed Sensor, Speeded-up 10km/h IQ High Speed Motor Magnet DS 2008-up/Precedent 48V Electric Golf Cart Sensor
Feature
- Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades.Most can expect to see 2-8 MPH gain depending on the health of your batteries.
- Our parts meet or exceed OEM quality standards.
- FLIP YOUR TOW/RUN SWITCH BEFORE INSTALLATION. Simply jack up the rear of your cart, remove your passenger side tire, remove (2) screws holding speed sensor to motor, replace magnet in motor, and re-install!
- Fits the Following Cart(s): Club Car (IQ) models with ADC motor ONLY!
- If you have questions regarding if your Club Car has a IQ system with ADC motor or a GE motor . The easiest way to tell is by checking the serial number prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you have a cart with a IQ system. You can also look at the motor controller part number. If your model number starts with “1510” then you also have an IQ system.
Description
Installation Instructions:
1: Flip the Tow/Run Switch to the TOW position (this should be done whenever you are servicing the cart)
2: Disconnect main positive and negative battery cables to your cart
3: Remove the ADC speed sensor from the end of your cart motor
4: Now you can gain access to the magnet. Simple remove the magnet by using a small flat head screwdriver or socket
5: Install the new magnet in the same position you just remove the old magnet from
6: No just re-install the speed sensor, re-attach the battery cables, and run the Tow/Run switch back to the RUN position.
If you have questions regarding if your Club Car has a IQ system with ADC motor or a GE motor. The easiest way to tell is by checking the serial number prefix. If your serial numbers starts with: AQ, CE, FD, HD, PE, or PQ then you have a cart with a IQ system. You can also look at the motor controller part number. If your model number starts with “1510” then you also have an IQ system.
This magnet will fit, but will NOT work on vehicles equipped with the Excel system. Excel vehicles have serial number prefixes of PH, PJ, PU or PD This magnet is a “half-pulse” magnet. Once installed on your motor it will still communicate to the speed sensor exactly as the other magnet did, but only half as often. This magnet won’t give you a boost of power or torque it merely raises the electronic rev limiter so high that the vehicle will never reach it. In turn, you will be able to run the full potential of your vehicle..The regenerative motor braking becomes completely disabled when this magnet is installed and will allow you to “free-wheel” down hills. The magnet in this listing will fit any Club Car vehicle with the IQ drive system that is equipped with an ADC motor. There were two motors available with the IQ system. 1. GE – The GE is grey in color and uses a snap-in speed sensor. 2. ADC – The ADC motor uses a speed sensor shaped like a top hat that bolts on.
8. HKOO Club Car Speed Sensor, Speeded-up 10km/h IQ High Speed Motor Magnet DS/Precedent 48V Electric Golf Cart Sensor
Feature
- Increase your IQ golf carts speed without a loss in torque, without replacing your gears, or any motor/controller upgrades.
- Our parts meet or exceed OEM quality standards.
- FLIP YOUR TOW/RUN SWITCH BEFORE INSTALLATION. Simply jack up the rear of your cart, remove your passenger side tire, remove (2) screws holding speed sensor to motor, replace magnet in motor, and re-install!
- Fits the Following Cart(s): Club Car (IQ) models with ADC motor ONLY! Please look at additional photos or call if you are unsure this will fit.
- LIFETIME GUARANTEE – We sell only high quality products BUT if for whatever reason these magnetic hooks do not meet your requirements, we will provide you with a FULL refund at ANYTIME.
Description
HKOO Club Car Speed Sensor, Speeded-up 10km/h IQ High Speed Motor Magnet DS/Precedent 48V Electric Golf Cart Sensor
9. 10L0L IQ Speed Sensor Fits Club Car DS and Precedent ADC Electric Golf Cart Motor
Description
10L0L.Speed sensor kit KDS motor for Club Car IQ and i2 Excel electric 2004-up DS & Precedent
Quality Guarantee: Good Quality Level, Each item will be Test and in good shipping.
This item Ship by from Hongkong , will take 7-15 workdays to arrive
Kindly Note: Professional Repair Skills are need, Please reference to YouTube for install Guide before Your DIY Or to contact our customer service staff to provide you with the installation diagram
10. 10L0L Golf Cart IQ Motor Speed Sensor Assembly for Club Car DS Precedent 2004-up Electric with GE Motor, OEM# 102265601
Feature
- GE Motor end speed sensor assembly for Club Car golf cart, three wire sensor with 3-pin wedge lock plug
- Fits Club Car DS and Precedent 2004-up electric golf cart with GE Motor (model 5BC59JBS****)
- Replaces OEM part number: 102265601, 101942301, Nivel-9451
- The speed sensor assembly is used to connect the motor end and MCOR
- Flip your tow/run switch off before installation (disconnecting batteries is recommended)
Description
10L0L Golf Cart IQ Motor Speed Sensor Assembly for Club Car DS Precedent 2004-up Electric with GE Motor, Old Style, OEM# 102265601
Conclusion
By our suggestions above, we hope that you can found Club Car Speed Magnet Ge Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!