Top 10 Cardon Monoxide Alarm For Desktop

Product Description

The Kidde 9Co5 Battery-Operated Carbon Monoxide Detector Utilizes Sophisticated Electronic Components To Protect Individuals And Families. Its Snap-On Cover Provides Immediate Battery Access, While Its Safety Feature Makes It Difficult To Close The Cover If The Batteries ArenMade in: United States Dimensions: 11.5 X 11.5 X 7.5Brand: Kidde Item Weight: 0.75includes: Unit Instruction Guide

Amazon.com

Kidde 9CO5-LP

With the use of sophisticated electronic components, the Kidde 9CO5-LP battery-operated carbon monoxide alarm protects you and your family from the dangers of carbon monoxide. Also included is an intuitive slide-out battery door that gives easy and immediate access to the batteries and a safety feature mechanism that makes the unit difficult to close without the proper installation of the batteries. This easy-to-install alarm is appropriate for all living areas and comes with a 7-year life warranty and 5-year limited warranty.

Consumer Benefits

The Kidde 9CO5-LP will alert you and your family with a loud warning signal against the dangers of elevated carbon monoxide levels in your home. This battery-operated carbon monoxide alarm continuously monitors carbon monoxide levels, even during power outages when AC-only units are not providing protection.

Technical Specifications

This unit uses an electrochemical sensor, and when it detects carbon monoxide, it will alert the user with a distinct pattern. The alarm pattern is four short beeps, followed by five seconds of silence, then four more short beeps with a corresponding red LED light. This cycle will continue for four minutes and then change to one cycle every minute until the device is reset or the carbon monoxide is eliminated. In addition, the red LED light will pulse to indicate carbon monoxide has been detected until the device is reset or carbon monoxide is removed from the surrounding area. When there is no carbon monoxide present, a green LED light will flash every 30 seconds, indicating a properly operating alarm when power is present.

What’s in the Box

One Kidde 9CO5-LP unit and two AA batteries.

Features/Specifications

• Battery operated (3AA batteries included) – Provides protection during power outages
• Battery lockout system – Deters covering battery compartment without installation of batteries
• Slide-out battery door cover – Gives immediate access to batteries
• Test/reset button – Tests the unit for proper operation and can also reset the Carbon Monoxide alarm
• Low battery signal – Alerts user when the battery needs to be replaced
• Green LED – Flashes every 30-seconds to indicate the unit is operating properly
• Red LED – When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound

Product Description

The Kidde KN-COPP-B-LPM battery operated CO alarm provides continuous monitoring of CO levels, even during power outages when many CO incidents occur. The digital display feature allows for easy viewing of carbon monoxide levels from 30-999 PPM (parts per million). The KN-COPP-B-LPM will also detect and store concentration CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the cover without the batteries being installed. It has a 10-year life and a 10-year limited warranty.

Amazon.com

Kidde’s KN-COPP-LPM battery-operated carbon monoxide alarm with digital display helps to provide your home with extensive protection against the dangerous threat posed by the odorless and colorless gas. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.

KN-COPP-LPM Battery-Operated Carbon Monoxide Alarm At a Glance: Digital display allows for easy monitoring of CO levels Battery operation provides best protection during power outages Peak level memory displays the highest CO concentration since last reset Dimensions: 4.5 inches by 2.75 inches by 1.5 inches; weighs .66 pounds with batteries Five-year limited warranty

Kidde’s KN-COPP-LPM carbon monoxide detector is a free-standing unit, adding flexibility to placement around your home. View larger

Features
The KN-COPP-LPM is an essential device to help warn you and your family of dangerous carbon monoxide levels in your home. This alarm measures the exposure to carbon monoxide over time; it is designed to sound at 85 decibels at 10 feet when it detects 70 ppm (parts per million) of CO for 60 to 240 minutes, 150 ppm for 10 to 50 minutes, or 400 ppm for 4 to 15 minutes. The easily visible digital display indicates the level of CO that the unit is sensing, and it updates the status every 15 seconds for timely and accurate readings. Its free-standing design allows for attachment to a wall or placement on a counter or nightstand for convenient and comprehensive protection. The KN-COPP-LPM also includes a slide-out battery door that provides immediate access to the power source as well as a battery safeguard that makes it difficult to close the cover without batteries installed. An LED lighting system on the unit signals power levels and sourcing: the green LED will flash once every 30 seconds to indicate the alarm is operating properly when power is present, and the red LED will pulse to indicate carbon monoxide has been detected until the device is reset or the CO threat is eliminated. This device has an expected 7-year lifespan and comes equipped with a five-year manufacturer’s limited warranty.

What’s in the Box
One Kidde KN-COPP-LPM battery-operated carbon monoxide alarm with digital display and three AA batteries.

The KN-COPP-LPM features an easy-to-read digital display in front and an easy-access door to the batteries in back. (Click each to enlarge)

See all Product description

Product Description

Digital Display – Displays the level of carbon monoxide the unit is sensing. The unit updates this reading every 15 seconds

Amazon.com

Protect your family from the dangers of carbon monoxide (CO) exposure with the Kidde KN-COPP-3 Nighthawk Plug-In Carbon Monoxide Alarm with Battery Backup and Digital Display. The Nighthawk is an easy-to-install unit that provides reliable protection against the dangers of CO. It features a digital display that shows CO levels in parts per million allowing you to see if, how, and when levels change.

KN-COPP-3 Nighthawk Carbon Monoxide Alarm At a Glance: Plug-in unit with battery backup and digital display that shows CO level Level button displays the peak CO level recorded by the alarm since it was last reset Loud alarm pattern sounds when unit detects elevated CO levels Direct-plug, 6-foot power cord, and table top mounting options. Five-year limited warranty

This discreet alarm is designed to fit into any standard A/C outlet in your house. View larger.

The easy-read digital display updates every 15 seconds to indicate any abrupt changes or alarming trends in CO levels. View larger.

Advanced Technology in an Easy-to-Install, Plug-In Design
Designed for home use, the Kidde KN-COPP-3 Nighthawk is a UL-listed, A/C-powered, plug-in CO alarm that utilizes sophisticated electronic components and sensor technology to protect you and your family from the dangers of CO. It plugs directly into a standard A/C outlet and includes a 9-volt battery backup that provides continuous monitoring of CO levels–even during power outages.

About Carbon Monoxide: The Silent Killer
The leading cause of accidental poisoning deaths in North America, carbon monoxide (CO) is often referred to as the silent killer because it’s odorless, tasteless, and invisible. Carbon monoxide poisoning can come about via a number of sources, including everyday items and appliances in your home or office. And because symptoms of CO poisoning mimic the flu or other common illnesses it can often go undiagnosed.

Audible Alarm Pattern Alerts you to Elevated CO Levels
When placed on every level of your home, alarms like the KN-COPP-3 Nighthawk can help protect everyone in the house from CO exposure by giving you an unmistakable signal when levels have reached an unhealthy point. If unhealthy levels are detected, the alarm will emit four quick audible beats every five seconds until either levels decrease or the reset button is pressed.

Easy-to-Read Digital Display Shows CO Levels
The KN-COPP-3 Nighthawk is unique among traditional CO alarms because of its digital display. This display clearly shows levels of CO that the unit has detected and stored– from 30 to 999 ppm–and it updates every 15 seconds to indicate any abrupt changes or alarming trends. The display also shows the peak CO level recorded by the alarm since it was last reset or unplugged.

LED Shows Sensor Status
With the KN-COPP-3 Nighthawk, you never have to wonder if the sensor is functioning properly. A blinking dot in the lower right-hand corner of the display denotes normal operation, so you can trust that it’s working. In addition, you can test alarm function by pressing the test/reset button at any time to verify that the horn and electric circuitry are operating properly.

Convenient Mounting Options
The KN-COPP-3 Nighthawk has a low-profile design that makes it suitable for any room in your home. The detector can be plugged into any standard A/C outlet; it’s plug can be snapped into the back of the unit and can be rotated so the alarm remains vertical, independent of whether the electrical socket is mounted vertically or horizontally. In addition, the alarm comes with a 6-foot extension cord, so the unit can be plugged into the wall outlet and then placed on a table or shelf. For the most thorough protection, place an alarm on every level of your home.

The UL-listed Kidde KN-COPP-3 Nighthawk has a seven-year life and is backed by a five-year limited warranty.

About Kidde: A UTC Fire and Security Brand
Renowned for global leadership in fire detection and suppression, Kidde provides solutions ranging from portable fire extinguishers to advanced industrial controls such as flame detection and explosion suppression systems. Kidde is a UTC Fire and Security brand, with a history that’s rich with innovations, from the patent of the Chubb Detector Lock in 1818 to the development of the world’s first wireless networked smoke detectors in 2004.

What’s in the Box
Kidde KN-COPP-3 Nighthawk CO Alarm, 9-volt battery, mounting hardware, and installation guide.

Keep your family safe by placing alarms and extinguishers in each area of the house, and by having a fire escape plan. Click here for a detailed image.

See all Product description

Product Description

This handy 2-pack of First Alert CO400 Carbon Monoxide Alarms utilizes electrochemical carbon monoxide sensors to monitor your space for carbon monoxide threats. The battery-powered design doesn’t require an electrician; simply insert the included 9-volt battery into each alarm, and the carbon monoxide detectors are ready to go. The advanced electrochemical CO sensors detect carbon monoxide leaks from multiple sources, such as faulty fuel-burning appliances, blocked chimneys, and generators running inside or too close to homes. When CO levels become elevated, a loud 85-decibel alarm alerts you to the threat. Because CO evenly distributes itself, it’s important to have a CO detector on every level and in every bedroom of your home. Designed to be simple to use, each CO detector has just one button that silences or tests the unit, as well as an end-of-life timer that lets you know when it’s time to replace the device.

From the Manufacturer

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air. The First Alert CO400CN2 2-Pack carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. The permanent sensor lasts up to five-Years. Battery access in back of unit, 9 Volt battery included. The test/silence button both silences the alarm and allows you to test its functionality. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-Decibel horn. No installation is required and the attractive design allows the unit to be placed anywhere you need it. It includes an optional wall mount with no outlet required. An audible and visual low battery signal alerts you to replace the battery. Pull down action chart has convenient guide on what to do if an alarm sounds. 5-Year limited warranty. UL listed.

Product Description

BRK Model CO250 is a single station carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101. Model CO250 has been fully tested and complies with, UL2034, NFPA 720, and NFPA 101 and other agencies that model their codes after the above agencies. It meets building codes where battery operated carbon monoxide alarms with silence are required and with model building codes published by the ICC. BRK Model CO250 is a state of the art carbon monoxide alarm designed to provide early warning of the presence of carbon monoxide. It features an electrochemical carbon monoxide sensor, an 85dB horn, a full function test switch and a red LED light that indicates DC power or alarm. The CO250B features a 9V alkaline battery and the CO250LB a 9V long life lithium battery. This alarm has two silence features. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. It also features a tamper resistant locking pin that locks alarm cover to prevent removal of battery. Perfect for apartment, dormitory or hotel applications. The compact, low profile design complements any décor. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the hinged cover. When voltage drops to a pre-set warning level, the horn will “chirp” approximately once per minute to indicate a fresh battery is needed. To insure the battery is always replaced properly, the cover is designed to resist closing when the battery is missing. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

From the Manufacturer

BRK Model CO250 is a single station carbon monoxide alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, dormitories, and other multifamily dwellings as defined in standard NFPA 101. Model CO250 has been fully tested and complies with, UL2034, NFPA 720, and NFPA 101 and other agencies that model their codes after the above agencies. It meets building codes where battery operated carbon monoxide alarms with silence are required and with model building codes published by the ICC. BRK Model CO250 is a state of the art carbon monoxide alarm designed to provide early warning of the presence of carbon monoxide. It features an electrochemical carbon monoxide sensor, an 85dB horn, a full function test switch and a red LED light that indicates DC power or alarm. The CO250B features a 9V alkaline battery and the CO250LB a 9V long life lithium battery. This alarm has two silence features. Low Battery Silence: Temporarily silence the low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several minutes. It also features a tamper resistant locking pin that locks alarm cover to prevent removal of battery. Perfect for apartment, dormitory or hotel applications. The compact, low profile design complements any décor. Battery installation and removal can occur while the unit is mounted to the ceiling or wall via the hinged cover. When voltage drops to a pre-set warning level, the horn will “chirp” approximately once per minute to indicate a fresh battery is needed. To insure the battery is always replaced properly, the cover is designed to resist closing when the battery is missing. Designed for wall or ceiling mounting. Includes mounting anchors and screws.

Product Description

Kidde Worry-Free, 10 Year, Sealed Battery, Carbon Monoxide Alarm, Uses Electro-Chemical Sensing Technology To Protect Families, No Battery Replacement Required Over The 10 Year Life Of The Alarm, Alarm Automatically Activates When Attached To The Mounting Bracket, Tests/Reset Button, Green LED Light Indicates Alarm Is Operating Properly, Red LED Light Indicates Dangerous Levels & Alarm Will Sound End Of Life Warning, UL Listed, 10 Year Warranty, Clam Shell. This product adds a great value. Product is highly durable and very easy to use. This product is manufactured in China.

Amazon.com

Kidde infographic view larger

Carbon monoxide alarm in the bedroom view larger

Kidde Worry-Free Non-Digital Carbon Monoxide Alarm

Kidde Worry-Free carbon monoxide (CO) alarms offer 10 years of continuous detection from the leading cause of accidental poisoning deaths in America – carbon monoxide. The UL-listed alarms are the first and only models to contain a 10-year sensor as well as a sealed-in lithium battery proven to power the alarm for a decade. These two state-of-the-art technologies combine to create a premier level of protection. Homeowners have peace of mind knowing their CO alarm is always on, and they never have to be hassled by low-battery chirps or battery replacement. Until now, a CO sensor operated for five to seven years, based on the manufacturer. The Worry-Free alarms last nearly twice as long as the average model.

Long-Life Sealed Lithium Battery: Why It’s Needed

Each year, fire departments respond to an average of 72,000 CO poisoning incidents, according to the National Fire Protection Association. Known as the ‘silent killer,’ carbon monoxide is odorless, tasteless and invisible. The only safe way to detect it is with a working CO alarm. Industry surveys find approximately half of U.S. homes have a carbon monoxide alarm installed, most of those are battery-operated. A recent survey conducted on behalf of Kidde, found homeowners’ number one fire safety complaint is a low battery chirp.

Worry Free Benefits

The C3010 carbon monoxide detection unit provides one decade of protection; the sealed lithium batter provides 10 years of continuous power. It is also both maintenance-free and hassle-free; never replace a battery during the alarm’s operating life and no need to worry about the batteries being removed. Additionally, this Worry Free unit is the longest sensor life available and is proven effective for ten years with quick and easy installation by simply sliding the alarm onto the mounted bracket which activates it automatically.

What’s in the box

One single Kidde Worry-Free Non-Digital Carbon Monoxide Alarm. A ten-year limited warranty.

Specifications

• UL Listed – tested by an independent nonprofit testing agency to ensure it meets the US standard
• 85 decibel alarm – loud enough to wake the average sleeping adult
• Nighthawk electro-chemical sensor, which is proven to be the world’s most accurate based on claims by major manufacturers
• Test-Reset Button tests the alarm circuitry and horn, resets memory after alarm has sounded
• End-of-life signal chirps every 30-45 seconds when alarm needs to be replaced – approximately 10 years after power
• Deactivation switch disables the alarm and makes the batteries safe for disposal once the unit has reached the end of its 10-year life
• Tamper resistant feature prohibits a disabled alarm from being placed back onto the mounting bracket
• 10-Year Limited Warranty lasts the life of the alarm

See all Product description

Product Description

The First Alert CO410 Carbon Monoxide Alarm uses an electrochemical carbon monoxide sensor. Peak Level feature displays the highest concentration of carbon monoxide measured. When Carbon Monoxide levels become elevated, a loud 85-decibel alarm alerts you to the threat. Designed to be simple to use, the Carbon Monoxide detector has just one button that silences or tests the unit. Because CO evenly distributes itself, it’s important to have a CO detector on every level and in every bedroom of your home. This easy-to-use battery-powered design doesn’t require an electrician; simply insert the included AA batteries, and the carbon monoxide detector is ready to go.

Amazon.com

Carbon monoxide (CO) is the leading cause of accidental poisoning deaths in America, yet many people don’t know they are suffering from CO poisoning until its too late. Since symptoms of CO poisoning are like the flu, you might not even know you’re in danger at first. That’s why a carbon monoxide alarm is an excellent way to protect your family. It can detect the CO you can’t see, smell or taste in the air.

The First Alert CO410 carbon monoxide alarm uses an electrochemical carbon monoxide sensor-the most accurate technology available. This alarm is perfect for bedrooms, hallways, and basements. Its easy-to-read backlit digital LED display gives you a clear read-out of current CO concentrations in parts per million. It is powered by two AA replaceable batteries giving you peace of mind during power outages. The test/silence button both silences a non-threatening alarm and low battery warning and allows you to test the unit’s functionality. The alarm performs its own internal test as well. The unit monitors and re-alarms if carbon monoxide levels persist sounding a loud 85-decibel horn. No installation is required and the attractive design allows the unit to be placed anywhere you need it. It includes an optional wall mount–no outlet required. An audible and visual low battery signal alerts you to replace the battery. UL listed. –Bree Norlander

What’s in the Box
One carbon monoxide alarm, user’s manual, and two AA batteries

Product Description

The Nighthawk, Digital Battery Operated Carbon Monoxide Alarm, Easy To Install Unit That Provides Reliable Protection Against The Dangers Of Carbon Monoxide, Digital Display Feature Adds An Advanced Level Of Protection Showing CO Levels In PPM Allowing You To See If Levels Change, Written Information & Instruction, Easy For Anyone To Understand, Small, Sleek Design That Is Suitable For All Living Areas & Has A 7 Year Limited . The nighthawk digital battery operated carbon monoxide alarm has a digital display that shows the level of carbon monoxide in PPM allowing you to see if the levels change. The sleek design makes it suiteable for all living areas. This alarm has a 7 year .

Amazon.com

Easy to install and monitor, the Kidde Nighthawk KN-COPP-B-LP battery-operated carbon monoxide alarm with digital display provides reliable protection against the dangers of carbon monoxide. Its backlit digital display shows the current carbon monoxide (CO) level at a glance, and it displays every 15 seconds. With an increasing number of state and local governments passing legislation requiring CO detectors in homes, it’s never been a better time to safeguard your family against carbon monoxide exposure.

Battery-powered protection against the dangers of carbon monoxide (view larger).

 

Backlit digital display for easy monitoring at all hours (view larger).

KN-COPP-B-LP Battery-Powered Carbon Monoxide Alarm with Digital Display At a Glance: Battery operated, powered by 3 AAs (included) Backlit digital display updates with CO level every 15 seconds Peak level memory displays highest CO concentration since last reset Test/reset button to ensure proper operation Loud 85 dB alert when deadly CO gas is present Seven-year limited warranty

Features

Offering a small, sleek design that’s suitable for all living areas, the Nighthawk KN-COPP-B-LP provides you and your family with a loud warning signal against the dangers of elevated carbon monoxide levels. You’ll get continuous monitoring of CO levels, even during power outages when AC-only units are not providing protection. The digital display adds an advanced level of protection, showing CO levels in PPM (parts per million) and allowing you to see if levels change. The backlighting helps you read the display in the dark, and it also appears during the peak level cycle. The unit also has a peak level memory, which displays the highest CO concentration measured since the last reset.

It features two color LEDs for at-a-glance status updates. The green LED flashes once every 30 seconds to indicate the alarm is working properly. A red LED will pulse to indicate that carbon monoxide has been detected. When the unit detects carbon monoxide, the alarm sounds four short beeps (rated at 85 decibels at 10 feet), followed by five seconds of silence, and then followed by another set of four short beeps. The unit measures 3 inches by 5 inches by 1.5 inches.

The KN-COPP-B-LP includes multiple mounting options, allowing installation on a wall or a tabletop. It has a seven-year operating life (with matching seven-year limited warranty), providing 40 percent longer protection than other CO alarms. It’s powered by 3 AA batteries (included).

What’s in the Box

One Kidde Nighthawk KN-COPP-B-LP battery-operated carbon monoxide, three AA batteries, and operating instructions.

 

See larger image.

Product Description

The First Alert CO910 Carbon Monoxide Alarm with 10-Year Battery is designed to provide you with a decade of uninterrupted carbon monoxide monitoring. This carbon monoxide detector uses an electrochemical carbon monoxide sensor, the most accurate CO detection technology available, to detect the CO you can’t see, smell, or taste in the air. A built-in 10-year lithium ion battery provides continuous protection for the lifetime of the alarm, with no need to ever worry about changing batteries. Measuring a fraction of the size of traditional CO monitors, this stylish model is designed to mount unobtrusively on the wall or sit on top of a dresser or table. An 85-decibel horn sounds if carbon monoxide levels are too high, and a test/silence button silences the alarm and allows you to test its functionality.

From the Manufacturer

The introduction of the Ten- Year Series of Carbon Monoxide Alarms further solidifies First Alert’s endeavor to improve health and bolster the overall safety of you and everyone closest to you. The CO910 Carbon Monoxide Alarm features an unprecedented ten year life span that complies with the Current 10-Year Legislation. A leap in technology has eliminated the need to ever power or charge this unit with batteries. This allows for a decade’s worth of uninterrupted protection. An end of life signal will readily alert owners once the unit has reached its ten year capacity. Attain absolute peace of mind with the utilization of an Electrochemical CO Sensor that’s proven to be the industry standard for excellence in the identification of carbon monoxide. The addition of a fully powered LED and Alarm Indicator serve admirably in warning all nearby participants of a leak in CO. A near infinite amount of installation options are available with the inclusion of an Easy Sliding Mounting Bracket. Combine this with the unit’s sleek and thin design and you have an alarm that can be installed in nearly any setting. Half the size of competing models and a decade’s worth of protection reinforce First Alert’s endeavor to deliver products that excel in protecting what matters most. Includes a 10-year limited warranty.

PRODUCT INTRODUCTION:

This product is a smart carbon monoxide detector with voice prompt, microprocessor control, support displaying of the carbon monoxide gas concentration and the time. When trigger the gas detector. This detector adopt catalytic combustion method sensor which is stable and reliable. It keeps the place safe from the threats of carbon monoxide gas. This product can be well used in villas, factories, shopping malls, warehouses, office buildings etc. indoor places.

FEATURES:

1. MCU processing and SMT Manufacture Technology

2. Human voice prompt

3. High reliable electrochemical sensor

4. Carbon monoxide gas concentration displaying(PPM), clock displaying (24-hour system)

5. DC 9V by battery

6. Low current consumption, ultra-long standby time

7. Battery capacity displaying

8. Alarm memory function

9. Auto detect sensor failure