910 reviews analysed
1. GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
Feature
- 4 Hole sizes from 6.3Mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ).
- 6 different Push pin rivet for many brand vehicles.
- Great material – these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
- Widely application – these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
- PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover
Description
Specification: material: black nylon, suitable for car Use better replacement for original old worn broken one. Push type, easy to fasten.
2. 10L0L Golf Cart 4 Fender Flares (2) Front & (2) Rear fit Yamaha G22 G29,Club Car DS Precedent, EZGO RXV&TXT with Metal Hardware
Feature
- Accessories upgrade:10L0L golf cart trim fender flare set use STAINLESS STEEL SCREWS & NUTS it is strength to handle being installed without breaking, for a more secure and more secure look. NOTE: There are a reflector spot on each Fender Flares, subject to the actual received!
- 10L0L golf cart trim fender flare set made made of durable injection-molded black plastic with textured finish is more pliable too/ less ridged to avoid breakage
- Fender flares club car precedent is set of 4, 2 front and 2 rear fender flares,keep water and rocks from being thrown at operator &passengers, and flares add a new look to your golf cart
- Easy and quick installation, drilling is required on the cart.All mounting stainless steel hardware included
- 10L0L strives to provide better services and high-quality products. More and more golf cart parts and accessories for EZGO, Yamaha, Club Car will be find in 10L0L!
3. 10L0L Golf Cart Rear Seat Kit Arm Rests with Cup Holder, Rear Seat Kit Universal for EZGO, Club Car, Yamaha, More (Black)
Feature
- Golf Cart Arm Rest: High Quality Durable and Long Lasting Products Are What You Can Expect From. Cushion Bases consist of High Strength Polyethylene Composite.
- INSTALL WARM TIPS(IMPORTANT): Make sure the drill bit is perpendicular to the bar
- Make sure the holes are vertically aligned
- Make the screw drive in straight by hand
- Make sure there is no angular deviation
- Tighten hardware pack with a 3/8-inch (10mm) socket . If not perpendicular, the nut will pulling out of the plastic.
- Comes as a Set of 2 Golf Cart Arm Rest: – Passenger and Driver Side, A suggestion for those who own rear seats that flip open, if you install with the parts out of the box, you’ll need to have the cup holders face outwards in order for the seat to flip open properly.
- 10L0L Golf Cart Arm Rest Fits Most Golf Carts, Universal EZGO, Club Car, Yamaha, More. The Cup holders are removable to clean which is nice. Warm tips: Must ensure that there is a mounting frame of your golf cart, only suitable for the rear seat
- Golf Cart Arm Rest: Universal Fit for Most Golf Cart Rear Seats
- Drilling Is Required as The Seat Arm Rails Do Not Have Pre-Drilled Holes.
4. MOSNAI MCOR Potentiometer MCOR Accelerator for Club Car Precedent Golf Carts (2004-2011) MCOR Motor Controller Replace 1033279-01 or 102528501
Feature
- Club Car Precedent MCOR Accelerator Replaces: OEM# 1033279-01 or 102528501
- Fits Club Car Precedent golf carts 2004-2011
- Attention Please: Year 2009 Precedent cars changed to a TPS sensor (Throttle Position Sensor) instead of the MCOR2.If your vehicle been converted to MCOR2 it will have the TPS to MCOR adapter.
- Good Sealing for Longer Life: Ultrasonic bonding for this MCOR with waterproof ring inside. The waterproof is much better than other MCOR with only glue bonding.
- Warranty: Good After Services and backed by 1 year Warranty.
Description
Potentiometer for Club Car Precedent 2004-Up golf cart. MCOR motor controller input OEM Replace 1033279-01 or 102528501
What is an MCOR?
Motor controller output regulator. It takes the place of a potentiometer on a Club Car (actually, there’s one in it).
It is connected to the rod from the accelerator pedal, and it basically tells the controller how far you are pushing the pedal down, and how fast the controller should make the motor spin.
Common Issues and Solutions
One of the most common issues with electric Club Car vehicles today is the MCOR, or Motor Controller Output Regulator. The MCOR for sale on this particular listing is the “MCOR 2”.
MCOR2 was for Club Car Precedent golf carts. A failed unit will result in the vehicle not being able to maintain a steady speed. Jerky or hesitant operation will drive you crazy. The internal contacts of the MCOR get corroded and can no longer provide a clean throttle signal to the controller. An MCOR can also fail and keep a vehicle from running entirely. This happens when the internal micro switch fails and does not close when the pedal is depressed. If you have any of these symptoms, this may be the solution to your problem.
This RELIANCE OEM replacement part has been developed to meet or even exceed the manufacturer’s original equipment specifications.
Installation
Please check this video for installation:
Any problems. Please kindly contact us. Your 100% satisfaction is what we pursue.
5. 10L0L MCOR Potentiometer Accelerator for Club Car Precedent Golf Carts (2004-2011) Replace 1033279-01
Description
New MCOR Replacement quality Club Car Prec 2004-2011 #102528501
New and old packaging random delivery.
6. World 9.99 Mall Golf Cart Fender Flares for EZGO TXT| Club Car Precedent| Yamaha G22| EZGO RXV| Club Car DS| Yamaha Drive G29 – Set of 4 (Front and Rear)
Description
World 9.99 Mall Golf Cart Fender Flares Golf Cart Fender Flares for EZGO TXT Club Car Precedent Yamaha G22 EZGO RXV Club Car DS YAMAHA Drive/G29 – Set of 4 (Front and Rear)
7. NEW RecPro CLUB CAR DS GOLF CART ALL LED LIGHT KIT 1993 & UP
Description
NEW CLUB CAR DS LED HEADLIGHT & LED TAIL LIGHT 1982 & UP GOLF CART LED LIGHT KIT FITS DS MODELS (1982-UP) GAS OR ELECTRIC CARTS DIRECTIONS & HARDWARE ARE INCLUDED 2 LED HEADLIGHTS ,2 LED TAIL LIGHTS, WIRING HARNESS, PUSH/PULL SWITCH, HARDWARE, TEMPLATES Automotive style adjustable headlights with the turn of a screw. New and improved wiring connectors. Injection molded plastic bezels – BLACK Tapered holes for professional look. Stainless steel mounting screws. Kit Includes: Adjustable Bright LED Headlights. LED Tail Lights Plug & Play Wire Harness Push / pull switch. Installation template & Instructions. This light kit will not work as a replacement for an existing factory installed light kit from Club Car. The hole cut outs for the factory lights are bigger then our lights and there for will not fit. This kit is for Club Car DS golf carts that do not have lights already installed.
8. AW Golf Cart LED Light Kit ABS Plastic Compatible with Club Car DS Models from 1998 Outdoor Sport Light
Feature
- Fits Club Car DS Models
- LED red taillights for energy-saving and durability
- New and improved wiring connectors
- Golf cart light bar kit – offers everything you need to drive at night – headlight bar & taillights, wiring harness and an on/off switch
- Headlight Overall Dimension(LxWxH): 11 13/16″ x 4 3/4″ x 5 5/16″ (30 x 12 x 13.5cm)
- Taillight Overall Dimenson(LxWxH): 5 7/8″ x 4 5/16″ x 1 3/4″ (15 x 11 x 4.5cm)
- Voltage: 12V
- LED Taillight Wattage (per Light): 13.5W
Description
Features:
– Fits Club Car DS Models
– LED red taillights for energy-saving and durability
– New and improved wiring connectors
– Golf cart light bar kit – offers everything you need to drive at night – headlight bar & taillights, wiring harness and an on/off switc
Specifications:
– Headlight Overall Dimension(LxWxH): 11 13/16″ x 4 3/4″ x 5 5/16″ (30 x 12 x 13.5cm)
– Taillight Overall Dimenson(LxWxH): 5 7/8″ x 4 5/16″ x 1 3/4″ (15 x 11 x 4.5cm)
– Taillight Light Source: LED
– Headlight Light Source: Halogen Lamp
– Voltage: 12V
– LED Taillight Wattage (per Light): 13.5W
Package Contents:
– 2x Headlights
– 2x Taillights
– 10x Screws
– 1 set of Wiring Harness (with Switch)
– 6x Ribbons
– 1x Manual
9. 10L0L Universal 12.5 inch Golf Cart Steering Wheel/Adapter for EZGO TXT RXV, Club Car DS Precedent, Yamaha
Feature
- Universal 12.5″ golf cart steering wheel for EZGO TXT RXV, Club Car DS Precedent, Yamaha G8 G9 G11 G14 G16 G19 G21 G22 G29/Drive
- Easy Installation: Only a few simple steps, you can get a new look of the steering wheel.
- Ergonomic Design: Wooden feel provides a nice touch so that you will not feel any discomfort in both hands when driving for a long time.
- Package Include: A steering wheel (Adapter is not included)
- Attention: Must be installed with an adapter for different golf carts(required and sold separately). Please choose the adpater which fits your cart.
10. Club Car Precedent Golf Cart Fender Flares (Set of 4)
Description
Fits Club Car Precedent model golf carts. Adds sleek look while providing performance needed by fender flares. This does not fit a Club Car DS model.
Conclusion
By our suggestions above, we hope that you can found 2009 Club Car Precedent Dash Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!
