805 reviews analysed
1. The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
2. Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)
Feature
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- These stainless steel, combo-drive sidewalk bolts measure 1/4″ in diameter x 1-1/4″ in length and come in 25 pieces per retail package
- The combo head is Slotted and Phillips. The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4″
- Country of Origin: Taiwan
Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
3. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
4. The Hillman Group 831487 1/4 X 1-Inch Stainless Steel Hurricane Track Bolt, 100-Pack
Description
Product Description
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
From the Manufacturer
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
5. Hillman Group 90413 1/4-20-Inch x 2-1/2-Inch Combo, 100-Pack Zinc Round Head Combination Machine Screw, 1/4" x 2-1/2", 100 Pieces
Feature
- Use to fasten metal parts together
- Zinc finish for moderate corrosion protection
- Fasten with screwdriver to reduce risk of over-tightening
- If nuts are needed, use with nuts of the same finish and threading
- Stronger thread than wood screws, made finer and more precisely
- 100 pieces per retail package
Description
Product Description
A machine screw is a fastening screw with a machine-cut thread throughout the length of its shank. Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten various components together in machines, tools, etc. Fasten with a screwdriver to reduce risk of over-tightening and protect the screw and fastened material. If nuts are needed, use with nuts of the same finish and threading for proper fit. The length of a machine screw is measured from under the head to the point of the screw.
From the Manufacturer
Machine screws are used with nuts or screwed directly into a threaded receptacle to fasten metal parts together. Measured from the underside of the head to the tip of the screw to obtain fastener length. If nuts are needed, use with nuts of the same finish and threading for proper fit.
6. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
7. Ratchet Tie Down Straps – 4 Pk – 15 Ft- 500 Lbs Load Cap- 1500 Lb Break Strength- Cambuckle Alternative- Cargo Straps for Moving Appliances, Lawn Equipment, Motorcycle – Includes 2 Bungee Cord
Feature
- <
- li>
- <
- ul>
- HIGH QUALITY RATCHET TIE DOWN STRAPS – Travel with peace of mind if you’ve got the top rated industrial grade AUGO tie down straps!<
- ul>
- RUBBER COATED “S” HOOKS – Prevent your cargo and vehicle from being scratched!
- ERGONOMIC HANDLES ARE MOLDED ON – AUGO has unique molding technology. Our handles will never fall off!
- ADJUST TO THE SIZE OF YOUR CARGO – 15 ft. of webbing will securely hold big or small loads!
- TWO AUGO BUNGEE CORDS – Comes in handy. Added for your convenience!
8. 5/16" X 2-3/4" Stainless Wedge Anchor (10pc), 18-8 Stainless Steel
Feature
- HIGH QUALITY STAINLESS STEEL: Bolt Dropper Wedge Anchors are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
- ANCHORS YOU CAN DEPEND ON: Our concrete anchors are very strong and are great for both indoor and outdoor use. Whether you are attaching a boat lift to a seawall or securing a safe to concrete in your garage, you can depend on Bolt Dropper wedge anchors to hold.
- GREAT TO KEEP AROUND: Bolt Dropper wedge anchors are great to have around for when you need them most! Use in any application, any condition and any environment! Bolt Dropper anchors are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and long lasting!
- DIMENSIONS: Diameter: 5/16” | Length:2-3/4″ | Thread Type: Coarse (standard) | Quantity: 10 pcs | Material: 18-8 (304) Stainless Steel
- LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.
Conclusion
By our suggestions above, we hope that you can found 14 X 20 Hurricane Anchors for you.Please don’t forget to share your experience by comment in this post. Thank you!