Nowadays, there are so many products of 12 volt dc large crossflow cooling fan in the market and you are wondering to choose a best one.You have searched for 12 volt dc large crossflow cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12 volt dc large crossflow cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
845 reviews analysed
1. UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
Description
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
2. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
3. 75mm x 30mm 7530 12V Dual Ball Bearing DC Brushless Cooling Blower Fan AV-F7530MB UL CE
Feature
- Package Content : 1 x DC Brushless Cooling Blower Fan
- Rated Voltage: DC 12V, Current: 0.15A
- Bearing Type: Dual Ball Bearing, Speed: 3000 RPM, Air Flow: 9.40CFM
- Connector: 2 Terminal Connector with 2pin-ph2.5, Lead Wire Length: 250mm/24AWG.
- Life Expectance: 50000 hours at 25 degree, Noise: 28.35dB(A).
- UL CE approved certification. Waranty: 1 year and lifetime support.
Description
Description:
Model: AV-F7530MB
Name: 12V DC BRUSHLESS BLOWER FAN
Rated Voltage : 12V DC
Operation Voltage: DC 6.8-12.8V
Rated Current : 0.15A
Connector: 2pin-ph2.5
Rated Speed: 3000 R.P.M.
Max. Air Flow: 9.40CFM
Life Expectance: 50,000 hours at rated voltage and normal temperature and humidity
Insulation Level: UL Class A
Certificate: CE,UL
Acoustic Noise: 28.35dB***
DC Line Length :240mm
Rotation Direction: Counter-clockwise
Size: 75x75x30mm
Weight: 75g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
*While the fan is running, please do not lock the fan intentionally for a long period of time, the action will lead over-load and over-heat, will damage the fan, even burn the wire.
4. GDSTIME 75mm x 30mm 7530 DC 12 Volt Brushless Turbo Blower Cooling Fan
Feature
- Package include: 1 piece fan include mounting screws & nuts.
- Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H)
- Rated Voltage: DC 12V
- Rated Current: 0.26 Amp
- Speed:3200RPM
- Air flow:13.5 CFM
- Noise: 37 dBA
- The wide of inlet is 48mm / 1.9in； The Length of outlet is 36.5mm / 1.44in ±0.3
- The Wide of outlet is 24.7mm / 0.97in ±0.3
- Connector:XH2.54-2Pin
- Lead wire:UL Type (+): Red
- (-): Black. This is a two wire dc blower fan.
5. 2pack 50mm x 15mm 5015 12V Dual Ball Bearing DC Brushless Cooling Blower Fan BB5015H12 with 2 Pin Terminal UL TUV
Feature
- Package Content : 2 x DC Brushless Cooling Fan
- Bearing Type: Dual Ball Bearing, Speed: 6000 RPM, Air Flow : 3.87 CFM
- Rated Voltage: DC 12V, Current: 0.23A (0.35 Max.)
- Connector: 2 Terminal Connector with 2pin-ph2.5
- Advantage: Long Life (50000 hours) at 40 degree and Low Noise
- UL TUV approved certification. Warranty: 1 year and lifetime technical support.
Description
Description:
Model: BB5015H12
Name: 12V DC BRUSHLESS FAN
Rated Voltage : 12V DC
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size:50x50x15mm
Size:20g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
6. GDSTIME 3007 30mm x 30mm x7mm 12V DC Brushless Blower Cooling Fan
Feature
- Dimension of outer the frame is 30mm(L) x 30mm(W) x 7mm(H) / The size of fan in inch is 1.18in(L) x 1.18in(W) x 0.28in(H)
- Connector:PH2.0-2Pin
- Lead wire: Positive is Red wire
- Negative is Black wire.
- Rated Voltage: DC 12V
- Rated Current: 0.1Amp
- Rated Speed: 8500 RPM
- Air flow: 9.5CFM
- Noise: 24dBA
- Power: 0.7Watt.
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Description
7. WINSINN 50mm Blower Fan 12V 5015 50x15mm Turbine Turbo Brushless Cooling for DIY 3D Printer Extruder Hotend MK2 MK3 MK7 MK8 (Pack of 4Pcs)
Description
►Oil bearings 5015 Blower Fan – High Speed version
►Oil bearings, use time no more than 16 hours / day. The life expectancy is about 30,000 hours. Lubricating oil is required to maintain the bearing.
►Size: 50x50x15mm
►Rated voltage: DC 12V
►Line length: about 1.18in / 30mm
—————————————————————————————————————
Package include:
►4 x High Speed 5015 12V Blower Fan
———————————————————————————————————————
Product Warranty:
-WINSINN are devoted to offer premium quality products to all cherished customers. Meanwhile supply 60 days money back guarantee and 24 months warranty.
-If there are any questions, please feel free to contact us, WINSINN Customer Service Team will spare no efforts to assist with you within 24 hours.
8. Antrader 4020 12V DC Brushless Radial Cooling Turbo Blower Fan 40x40x20mm for DIY 3D Printer Extruder Humidifier and Other Small Appliances Series Repair Replacement 3-Pack
Feature
- High quality mini brushless 4020 DC 12V fan, sleeve-bearing design cooling cooler.
- Plastic construction fan. Dual Ball Bearing
- Speed: 6000 RPM
- Air Flow : 3.87 CFM
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.23A
- 40 x 40 x 20mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5
- Compact motor design for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
Description
The Best Product to Save Your Time and Money!
Specifications:
Model: 4020
Name: 12V DC BRUSHLESS FAN
Rated Voltage : DC12V
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5 Rated
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size: Size: 40x40x20mm/ 1.57″ x 1.57″ x 0.8″
Cable Lenght: 20cm
Weight: 68g
Package Content: 3 x DC Brushless Cooling Fan
Note:
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
Welcome to our store! Enjoy quality and healthy life! We dare to use the new, heart, innovation to supply the best quality products!
Any problem please feel free to contact us first so that we can supply the best service for you.
9. GDSTIME 7025 70mm x 70mm x 25mm 12V DC Brushless Cooling Fan
Feature
- Dimension of outer the frame is 70mm(L) x 70mm(W) x 25mm(H) / The size of fan in inch is 2.76in(L) x 2.76in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 61.5mm/2.40in.
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Rated Voltage: DC 12V
- Rated Current: 0.2Amp
- Rated Speed: 2800 RPM
- Air flow: 46.9CFM
- Noise: 32dBA
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Package include: 1 Piece fan include mounting screws.
Description
Operating Voltage Range: 5.5Volt to 13.6Volt.
(overtake to 13.6V, it can also work. but not safe,
and seriously affects lifespan of fan.)
Operating Temperature: -10℃ – 75℃
Storage Temperature: -40℃ – 80℃
Package include:
1 x 70mm cooling fan
4*M4X35mm screws
( The fan is mounted by screws.)
10. SUNON MF80251V2-Q040-S99 DC 12V 6.63W, DC Blower, Double Ball Cooling Fans, Genuine Original Equipment Manufacturer (OEM) Parts
Feature
- We are a professional cooling fan supplier, with excellent technical team to ensure the quality of genuine original.
- Suitable for all brands of computers, electrical equipment cooling fans, cooling fan motors, original equipment manufacturers (OEM) original parts
- All products are guaranteed to be genuine and have been rigorously tested before being sent. They are used in the same way as new products and are guaranteed for one year.
- All pictures are taken in kind, please check carefully before placing an order.
- Fans of the same model may have different wires, you need to check the old fan first or contact us.
Description
SUNON MF80251V2-Q040-S99 DC 12V 6.63W, DC Blower, Double Ball Cooling Fans, Genuine Original Equipment Manufacturer (OEM) Parts
Conclusion
By our suggestions above, we hope that you can found 12 Volt Dc Large Crossflow Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
